|
NLV17SZU04DFT2G Datasheet, PDF (2/7 Pages) ON Semiconductor – Single Unbuffered Inverter | |||
|
◁ |
PIN ASSIGNMENT
(SOTâ353/SC70â5/SCâ88A/SOTâ553)
Pin
Function
1
NC
2
A
3
GND
4
Y
5
VCC
NL17SZU04
PIN ASSIGNMENT (SOTâ953)
Pin
Function
1
IN A
2
GND
3
NC
4
OUT Y
5
VCC
FUNCTION TABLE
Input
A
L
H
Output
Y=A
Y
H
L
MAXIMUM RATINGS
Symbol
Parameter
Value
Units
VCC
DC Supply Voltage
â0.5 to +7.0
V
VIN
DC Input Voltage
â0.5 to +7.0
V
VOUT DC Output Voltage (SOTâ353/SC70â5/SCâ88A/SOTâ553 Packages)
â0.5 to VCC + 0.5
V
VOUT
DC Output Voltage
(SOTâ953 Package)
Output at High or Low State
â0.5 to VCC + 0.5
V
PowerâDown Mode (VCC = 0 V)
â0.5 to + 0.5
IIK
DC Input Diode Current
â50
mA
IOK
DC Output Diode Current
VOUT < GND, VOUT > VCC
±50
mA
(SOTâ353/SC70â5/SCâ88A/SOTâ553 Packages)
IOK
IOUT
ICC
TSTG
TL
TJ
qJA
DC Output Diode Current (SOTâ953 Package)
DC Output Sink Current
DC Supply Current per Supply Pin
Storage Temperature Range
Lead Temperature, 1 mm from Case for 10 Seconds
Junction Temperature Under Bias
Thermal Resistance
SCâ88A/SOTâ353 (Note 1)
SOTâ553
VOUT < GND
â50
±50
±100
â65 to +150
260
+150
350
496
mA
mA
mA
°C
°C
°C
°C/W
PD
Power Dissipation in Still Air at 85°C
SCâ88A/SOTâ353
SOTâ553
mW
186
135
MSL Moisture Sensitivity
Level 1
FR
Flammability Rating
Oxygen Index: 28 to 34
UL 94 Vâ0 @ 0.125 in
VESD
ESD Withstand Voltage
Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
V
Class IC
Class A
N/A
ILATCHUP Latchup Performance Above VCC and Below GND at 125°C (Note 5)
±100
mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Measured with minimum pad spacing on an FR4 board, using 10 mmâbyâ1 inch, 2âounce copper trace with no air flow.
2. Tested to EIA/JESD22âA114âA, rated to EIA/JESD22âA114âB.
3. Tested to EIA/JESD22âA115âA, rated to EIA/JESD22âA115âA.
4. Tested to JESD22âC101âA.
5. Tested to EIA/JESD78.
http://onsemi.com
2
|
▷ |