NLU1GT04_16 Datasheet, PDF (2/6 Pages) ON Semiconductor – Single Inverter, TTL Level

NLU1GT04
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
V_CC
V_IN
V_OUT
I_IK
I_OK
I_O
I_CC
I_GND
T_STG
T_L
T_J
MSL
DC Supply Voltage
DC Input Voltage
DC Output Voltage
DC Input Diode Current
DC Output Diode Current
DC Output Source/Sink Current
DC Supply Current Per Supply Pin
DC Ground Current per Ground Pin
Storage Temperature Range
Lead Temperature, 1 mm from Case for 10 Seconds
Junction Temperature Under Bias
Moisture Sensitivity
V_IN < GND
V_OUT < GND
−0.5 to +7.0
V
−0.5 to +7.0
V
−0.5 to +7.0
V
−20
mA
±20
mA
±12.5
mA
±25
mA
±25
mA
−65 to +150
°C
260
°C
150
°C
Level 1
F_R
V_ESD
Flammability Rating Oxygen
ESD Withstand Voltage
Index: 28 to 34
Human Body Model (Note 2)
Machine Model (Note 3)
Charged Device Model (Note 4)
UL 94 V−0 @ 0.125 in
> 2000
V
> 200
N/A
I_LATCHUP Latchup Performance Above V_CC and Below GND at 125 °C (Note 5)
±500
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA / JESD22−A114−A.
3. Tested to EIA / JESD22−A115−A.
4. Tested to JESD22−C101−A.
5. Tested to EIA / JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Max
Unit
V_CC
Positive DC Supply Voltage
1.65
5.5
V
V_IN
Digital Input Voltage
0
5.5
V
V_OUT Output Voltage
0
5.5
V
T_A
Operating Free−Air Temperature
−55
+125
°C
Dt/DV Input Transition Rise or Fall Rate
V_CC = 3.3 V ± 0.3 V
V_CC = 5.0 V ± 0.5 V
0
100
ns/V
0
20
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
www.onsemi.com
2