NCP716 Datasheet, PDF (2/17 Pages) ON Semiconductor – 80 mA Ultra-Low Iq, Wide Input Voltage Low Dropout Regulator

NCP716
IN
BANDGAP
REFERENCE
UVLO
THERMAL
SHUTDOWN
MOSFET
DRIVER WITH
CURRENT LIMIT
GND
EEPROM
Figure 2. Simplified Block Diagram
OUT
Table 1. PIN FUNCTION DESCRIPTION
Pin No.
wDFN6, 2 x 2
Pin
Name
Description
6
OUT Regulated output voltage pin. A small 0.47 mF ceramic capacitor is needed from this pin to ground to
assure stability.
2
N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected.
3, EXP
GND Power supply ground. Exposed pad EXP must be tied with GND pin 3.
4
N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected.
5
N/C No connection. This pin can be tied to ground to improve thermal dissipation or left disconnected.
1
IN
Input pin. A small capacitor is needed from this pin to ground to assure stability.
Table 2. ABSOLUTE MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Input Voltage (Note 1)
V_IN
−0.3 to 24
V
Output Voltage
V_OUT
−0.3 to 5
V
Output Short Circuit Duration
t_SC
Indefinite
s
Maximum Junction Temperature
T_J(MAX)
150
°C
Storage Temperature
T_STG
−55 to 150
°C
ESD Capability, Human Body Model (Note 2)
ESD_HBM
2000
V
ESD Capability, Machine Model (Note 2)
ESD_MM
200
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
2. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
Latch up Current Maximum Rating tested per JEDEC standard: JESD78
Table 3. THERMAL CHARACTERISTICS
Rating
Thermal Characteristics, wDFN6, 2 mm x 2 mm
Thermal Resistance, Junction−to−Air
Symbol
R_qJA
Value
120
Unit
°C/W
http://onsemi.com
2