MUR805 Datasheet, PDF (2/8 Pages) Micro Commercial Components – 8 Amp S uper Fast Glass Passivated R ec tif ie r 50 to 400 Volts

MUR805, MUR810, MUR815, MUR820, MUR840, MUR860
MAXIMUM RATINGS
MUR
Rating
Symbol 805 810 815 820 840 860 Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
Total Device, (Rated V_R), T_C = 150°C
V_RRM
50 100 150 200 400 600
V
V_RWM
V_R
I_F(AV)
8.0
A
Peak Repetitive Forward Current
I_FM
(Rated V_R, Square Wave, 20 kHz), T_C = 150°C
16
A
Nonrepetitive Peak Surge Current
I_FSM
100
A
(Surge applied at rated load conditions halfwave,
single phase, 60 Hz)
Operating Junction Temperature and
Storage Temperature Range
T_J, T_stg
−65 to +175
°C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS
Maximum Thermal Resistance, Junction−to−Case
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 1)
(i_F = 8.0 Amps, T_C = 150°C)
(i_F = 8.0 Amps, T_C = 25°C)
Maximum Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, T_J = 150°C)
(Rated dc Voltage, T_J = 25°C)
Maximum Reverse Recovery Time
(I_F = 1.0 Amp, di/dt = 50 Amps/ms)
(I_F = 0.5 Amp, i_R = 1.0 Amp, I_REC = 0.25 Amp)
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
R_qJC
v_F
i_R
t_rr
3.0
0.895
0.975
250
5.0
35
25
2.0
°C/W
V
1.00 1.20
1.30 1.50
mA
500
10
ns
60
50
ORDERING INFORMATION
Device
Package
Shipping^†
MUR805
TO−220
50 Units / Rail
MUR810
TO−220
50 Units / Rail
MUR815
TO−220
50 Units / Rail
MUR815G
TO−220
(Pb−Free)
50 Units / Rail
MUR820
TO−220
50 Units / Rail
MUR820G
TO−220
(Pb−Free)
50 Units / Rail
MUR840
TO−220
50 Units / Rail
MUR840G
TO−220
(Pb−Free)
50 Units / Rail
MUR860
TO−220
50 Units / Rail
MUR860G
TO−220
(Pb−Free)
50 Units / Rail
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2