MUR3020WTG Datasheet, PDF (2/7 Pages) ON Semiconductor – Switch Mode Power Rectifiers

MUR3020WTG, MUR3040WTG, MUR3060WTG
MAXIMUM RATINGS (Per Leg)
Rating
Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current @ 145°C
Total Device
V_RRM
200
400
600
V
V_RWM
V_R
I_F(AV)
15
A
30
Peak Repetitive Surge Current
(Rated V_R, Square Wave, 20 kHz, T_C = 145°C)
I_FM
30
A
Nonrepetitive Peak Surge Current (Surge applied at rated load
conditions, halfwave, single phase, 60 Hz)
I_FSM
200
150
150
A
Operating Junction and Storage Temperature
T_J, T_stg
− 65 to +175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
THERMAL CHARACTERISTICS (Per Leg)
Rating
Maximum Thermal Resistance,
− Junction−to−Case
− Junction−to−Ambient
Symbol
R_qJC
R_qJA
MUR3020WT
MUR3040WT
1.5
40
MUR3060WT Unit
°C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Rating
Symbol MUR3020WT MUR3040WT MUR3060WT Unit
Maximum Instantaneous Forward Voltage (Note 1)
(I_F = 15 Amp, T_C = 150°C)
(I_F = 15 Amp, T_C = 25°C)
V_F
0.85
1.12
1.05
1.25
V
1.4
1.7
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, T_J = 150°C)
(Rated DC Voltage, T_J = 25°C)
i_R
500
10
mA
500
1000
10
10
Maximum Reverse Recovery Time (i_F = 1.0 A, di/dt = 50 Amps/ms)
t_rr
35
60
60
ns
Typical Peak Reverse Recovery Current
I_RM
0.7
A
(I_F = 1.0 A, di/dt = 50 A/ms)
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
http://onsemi.com
2