|
MC74LVX8053 Datasheet, PDF (2/12 Pages) ON Semiconductor – Analog Multiplexer/Demultiplexer | |||
|
◁ |
MC74LVX8053
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ MAXIMUM RATINGS*
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
Value
Unit
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VCC
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIS
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ I
Positive DC Supply Voltage (Referenced to GND) â 0.5 to + 7.0
V
Analog Input Voltage
Digital Input Voltage (Referenced to GND)
DC Current, Into or Out of Any Pin
â 0.5 to VCC + 0.5 V
â 0.5 to VCC + 0.5 V
± 20
mA
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ PD Power Dissipation in Still Air,
SOIC Packageâ
500
mW
TSSOP Packageâ
450
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Tstg Storage Temperature Range
â 65 to + 150
_C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TL Lead Temperature, 1 mm from Case for 10 Seconds
260
_C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ *Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
â Derating â SOIC Package: â 7 mW/_C from 65_ to 125_C
TSSOP Package: â 6.1 mW/_C from 65_ to 125_C
RECOMMENDED OPERATING CONDITIONS
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Symbol
Parameter
Min Max Unit
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VCC Positive DC Supply Voltage
(Referenced to GND) 2.0 6.0 V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIS Analog Input Voltage
0.0 VCC V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ Vin
Digital Input Voltage (Referenced to GND)
GND VCC V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ VIO* Static or Dynamic Voltage Across Switch
1.2 V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ TA
Operating Temperature Range, All Package Types
â 55 + 85 _C
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ tr, tf Input Rise/Fall Time
(Channel Select or Enable Inputs)
ns/V
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà VCC=3.3V ±0.3V 0
100
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃà VCC=5.0V ±0.5V 0
20
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ *For voltage drops across switch greater than 1.2 V (switch on), excessive VCC current may
be drawn; i.e., the current out of the switch may contain both VCC and switch input
components. The reliability of the device will be unaffected unless the Maximum Ratings are
exceeded.
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this highâimpedance cir-
cuit. For proper operation, Vin and
v v Vout should be constrained to the
range GND (Vin or Vout) VCC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Unused outputs must be left open.
http://onsemi.com
2
|
▷ |