MC74ACT241_15 Datasheet, PDF (2/7 Pages) ON Semiconductor – Octal Buffer/Line Driver with 3-State Outputs

MC74ACT241
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
V_CC
V_IN
V_OUT
I_IK
I_OK
I_OUT
I_CC
I_GND
T_STG
T_L
T_J
q_JA
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Output Voltage (Referenced to GND) (Note 1)
DC Input Diode Current
DC Output Diode Current
DC Output Sink/Source Current
DC Supply Current, per Output Pin
DC Ground Current, per Output Pin
Storage Temperature Range
Lead temperature, 1 mm from Case for 10 Seconds
Junction Temperature Under Bias
Thermal Resistance (Note 2)
SOIC
TSSOP
−0.5 to +7.0
−0.5 to V_CC +0.5
−0.5 to V_CC +0.5
±20
±50
±50
±50
±100
*65 to )150
260
140
65.8
110.7
V
V
V
mA
mA
mA
mA
mA
_C
_C
_C
_C/W
MSL Moisture Sensitivity
Level 1
F_R
V_ESD
Flammability Rating
ESD Withstand Voltage
Oxygen Index: 30% − 35% UL 94 V−0 @ 0.125 in
Human Body Model (Note 3)
> 2000
V
Machine Model (Note 4)
> 200
Charged Device Model (Note 5)
> 1000
I_Latchup Latchup Performance
Above V_CC and Below GND at 85_C (Note 6)
±100
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. I_OUT absolute maximum rating must be observed.
2. The package thermal impedance is calculated in accordance with JESD 51−7.
3. Tested to EIA/JESD22−A114−A.
4. Tested to EIA/JESD22−A115−A.
5. Tested to JESD22−C101−A.
6. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Unit
V_CC
V_IN, V_OUT
T_A
t_r, t_f
DC Input Voltage (Referenced to GND)
DC Input Voltage, Output Voltage (Referenced to GND)
Operating Temperature, All Package Types
Input Rise and Fall Time (Note 8)
4.5
5.5
V
0
V_CC
V
−40
25
+85
°C
V_CC = 4.5 V
0
V_CC = 5.5 V
0
10
10
ns/V
8.0
8.0
I_OH
Output Current − High
−
−
−24
mA
I_OL
Output Current − Low
−
−
24
mA
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
7. Unused Inputs may not be left open. All inputs must be tied to a high voltage level or low logic voltage level.
8. V_in from 0.8 V to 2.0 V; refer to individual Data Sheets for devices that differ from the typical input rise and fall times.
www.onsemi.com
2