MC74AC132_15 Datasheet, PDF (2/6 Pages) ON Semiconductor – Quad 2-Input NAND Schmitt Trigger

MC74AC132, MC74ACT132
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
V_CC
V_I
V_O
I_IK
I_OK
I_O
I_CC
I_GND
T_STG
T_L
T_J
q_JA
P_D
MSL
DC Supply Voltage
DC Input Voltage
DC Output Voltage
DC Input Diode Current
DC Output Diode Current
DC Output Sink/Source Current
DC Supply Current per Output Pin
DC Ground Current per Output Pin
Storage Temperature Range
Lead temperature, 1 mm from Case for 10 Seconds
Junction temperature under Bias
Thermal Resistance (Note 2)
Power Dissipation in Still Air at 85°C
Moisture Sensitivity
(Note 1)
*0.5 to )7.0
*0.5 v V_I v V_CC )0.5
*0.5 v V_O v V_CC )0.5
$20
$50
$50
$50
$50
*65 to )150
260
)150
125
125
Level 1
V
V
V
mA
mA
mA
mA
mA
°C
°C
°C
°C/W
mW
F_R
V_ESD
Flammability Rating
ESD Withstand Voltage
Oxygen Index: 30% − 35%
UL 94 V−0 @ 0.125 in
Human Body Model (Note 3)
> 2000
V
Machine Model (Note 4)
> 200
Charged Device Model (Note 5)
> 1000
I_{Latch−Up} Latch−Up Performance Above V_CC and Below GND at 85°C (Note 6)
$100
mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. I_O absolute maximum rating must be observed.
2. The package thermal impedance is calculated in accordance with JESD51−7.
3. Tested to EIA/JESD22−A114−A.
4. Tested to EIA/JESD22−A115−A.
5. Tested to JESD22−C101−A.
6. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Typ
Max
Unit
V_CC
Supply Voltage
′AC
′ACT
2.0
5.0
6.0
V
4.5
5.0
5.5
V_in, V_out DC Input Voltage, Output Voltage (Ref. to GND)
0
−
V_CC
V
t_r, t_f
Input Rise and Fall Time (Note 1)
′AC Devices except Schmitt Inputs
V_CC @ 3.0 V
−
150
−
V_CC @ 4.5 V
−
40
−
ns/V
V_CC @ 5.5 V
−
25
−
t_r, t_f
Input Rise and Fall Time (Note 2)
′ACT Devices except Schmitt Inputs
V_CC @ 4.5 V
−
10
−
ns/V
V_CC @ 5.5 V
−
8.0
−
T_J
Junction Temperature (PDIP)
−
−
140
°C
T_A
Operating Ambient Temperature Range
−40
25
85
°C
I_OH
Output Current − High
−
−
−24
mA
I_OL
Output Current − Low
−
−
24
mA
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
1. V_in from 30% to 70% V_CC; see individual Data Sheets for devices that differ from the typical input rise and fall times.
2. V_in from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times.
www.onsemi.com
2