MBRS360T3G_14 Datasheet, PDF (2/7 Pages) ON Semiconductor – Surface Mount Schottky Power Rectifier

MBRS360T3G, MBRS360BT3G, NRVBS360T3G, NRVBS360BT3G
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
V_RRM
60
V
V_RWM
V_R
Average Rectified Forward Current
I_F(AV)
3.0 @ T_L = 137°C
A
4.0 @ T_L = 127°C
Nonrepetitive Peak Surge Current
I_FSM
A
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
125
Storage Temperature Range
T_stg
− 65 to +175
°C
Operating Junction Temperature (Note 1)
T_J
− 65 to +175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, Junction−to−Lead (Note 2)
SMC Package
SMB Package
Symbol
R_qJL
Value
11
15
Unit
°C/W
Thermal Resistance, Junction−to−Ambient (Note 2)
SMC Package
SMB Package
Thermal Resistance, Junction−to−Ambient (Note 3)
SMC Package
SMB Package (Note 4)
R_qJA
°C/W
136
145
R_qJA
°C/W
71
73
ELECTRICAL CHARACTERISTICS
Maximum Instantaneous Forward Voltage (Note 5)
(i_F = 3.0 A, T_J = 25°C)
V_F
V
0.63
Maximum Instantaneous Reverse Current (Note 5)
(Rated dc Voltage, T_J = 25°C)
(Rated dc Voltage, T_J = 100°C)
i_R
mA
0.03
3.0
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Mounted with minimum recommended pad size, PC Board FR4.
3. 1 inch square pad size (1 x 0.5 inch for each lead) on FR4 board.
4. Typical Value; 1 inch square pad size (1 x 0.5 inch for each lead) on FR4 board.
5. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
10
T_J = 150°C
T_J = 175°C
1
T_J = 100°C
0.1
T_J = 25°C
T_J = −40°C
0.01
0.0
0.2
0.4
0.6
0.8
V_F, INSTANTANEOUS FORWARD VOLTAGE (V)
Figure 1. Typical Forward Voltage
10
T_J = 175°C
1
T_J = 150°C
0.1 ^TJ ^{= 100°C}
T_J = 25°C
T_J = −40°C
0.01
0.0
0.2
0.4
0.6
0.8
V_F, INSTANTANEOUS FORWARD VOLTAGE (V)
Figure 2. Maximum Forward Voltage
http://onsemi.com
2