MBRP30045CT Datasheet, PDF (2/4 Pages) Motorola, Inc – POWERTAP II SWITCHMODE™ Power Rectifiers

MBRP30045CT
THERMAL CHARACTERISTICS (Per Leg)
Rating
Symbol
Value
Unit
Thermal Resistance, Junction−to−Case
R_qJC
0.45
°C/W
ELECTRICAL CHARACTERISTICS (Per Leg)
Instantaneous Forward Voltage (Note 1)
(i_F = 150 Amps, T_J = 25°C)
(i_F = 300 Amps, T_J = 25°C)
v_F
V
0.70
0.82
Instantaneous Reverse Current (Note 1)
(Rated dc Voltage, T_J = 125°C)
(Rated dc Voltage, T_J = 25°C)
i_R
mA
75
0.8
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%.
MAXIMUM MECHANICAL RATINGS
Terminal Penetration:
Terminal Torque:
Mounting Torque —
Outside Holes:
Mounting Torque —
Center Hole:
Seating Plane
Flatness
0.235 max
25−40 in-lb max
30−40 in-lb max
8−10 in-lb max
1 mil per in.
(between mounting holes)
POWERTAP MECHANICAL DATA
APPLIES OVER OPERATING TEMPERATURE
2″
Vertical Pull
250 lbs. max
2 in. Lever Pull
50 lbs. max
Note: While the POWERTAP is capable of sustaining these vertical and levered tensions, the intimate contact
Note: between POWERTAP and heat sink may be lost. This could lead to thermal runaway. The use of very
Note: flexible leads is recommended for the anode connections. Use of thermal grease is highly recommended.
www.onsemi.com
2