MBR60H100CTG Datasheet, PDF (2/7 Pages) ON Semiconductor – Switch-mode Power Rectifier

MBR60H100CTG, MBRB60H100CTT4G, NRVBB60H100CTT4G
MAXIMUM RATINGS (Per Diode Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
Average Rectified Forward Current
(T_C = 155°C)
Per Diode
Per Device
V_RRM
100
V
V_RWM
V_R
I_F(AV)
A
30
60
Peak Repetitive Forward Current
(Square Wave, 20 kHz, T_C = 151°C)
I_FRM
60
A
Nonrepetitive Peak Surge Current
(Surge applied at rated load conditions halfwave, single phase, 60 Hz)
I_FSM
350
A
Operating Junction Temperature (Note 1)
Storage Temperature
Voltage Rate of Change (Rated V_R)
Controlled Avalanche Energy (see test conditions in Figures 9 and 10)
ESD Ratings: Machine Model = C
Human Body Model = 3B
T_J
T_stg
dv/dt
W_AVAL
+175
*65 to +175
10,000
400
> 400
> 8000
°C
°C
V/ms
mJ
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. The heat generated must be less than the thermal conductivity from Junction−to−Ambient: dP_D/dT_J < 1/R_qJA.
THERMAL CHARACTERISTICS
Characteristic
Maximum Thermal Resistance
Junction−to−Case (Min. Pad)
Junction−to−Ambient (Min. Pad)
Symbol
R_qJC
R_qJA
Value
1.0
70
Unit
°C/W
ELECTRICAL CHARACTERISTICS (Per Diode Leg)
Characteristic
Symbol
Min
Typ
Max
Unit
Maximum Instantaneous Forward Voltage (Note 2)
(i_F = 30 A, T_J = 25°C)
(i_F = 30 A, T_J = 125°C)
(i_F = 60 A, T_J = 25°C)
(i_F = 60 A, T_J = 125°C)
v_F
V
−
0.80
0.84
−
0.68
0.72
−
0.93
0.98
−
0.81
0.84
Maximum Instantaneous Reverse Current (Note 2)
(Rated DC Voltage, T_J = 125°C)
(Rated DC Voltage, T_J = 25°C)
i_R
mA
−
2.0
10
−
0.0013
0.01
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%.
www.onsemi.com
2