ESDONCAN1_16 Datasheet, PDF (2/5 Pages) ON Semiconductor – CAN/CAN-FD Bus Protector

ESDONCAN1, SESDONCAN1
MAXIMUM RATINGS (T_J = 25°C, unless otherwise specified)
Symbol
Rating
Value
Unit
PPK Peak Power Dissipation, 8 x 20 ms Double Exponential Waveform (Note 1)
200
W
T_J
T_J
T_L
ESD
Operating Junction Temperature Range
Storage Temperature Range
Lead Solder Temperature (10 s)
Human Body Model (HBM)
Machine Model (MM)
IEC 61000−4−2 Specification (Contact)
−55 to 150
°C
−55 to 150
°C
260
°C
8.0
kV
400
V
23
kV
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Non−repetitive current pulse per Figure 1.
ELECTRICAL CHARACTERISTICS (T_J = 25°C, unless otherwise specified)
Symbol
Parameter
Test Conditions
Min
Typ
Max
Unit
V_RWM Reverse Working Voltage
(Note 2)
24
−
−
V
V_BR Breakdown Voltage
I_R
Reverse Leakage Current
V_C Clamping Voltage
I_T = 1 mA (Note 3)
26.2
−
32
V
V_RWM = 24 V
−
15
100
nA
I_PP = 1 A (8 x 20 ms Waveform)
−
33.4
36.6
V
(Note 4)
V_C Clamping Voltage
I_PP = 3 A (8 x 20 ms Waveform)
−
44
50
V
(Note 4)
I_PP Maximum Peak Pulse Current
8 x 20 ms Waveform (Note 4)
−
−
3.0
A
C_J
Capacitance
V_R = 0 V, f = 1 MHz (Line to GND)
−
−
10
pF
DC Diode Capacitance Matching
V_R = 0 V, 5 MHz (Note 5)
−
0.26
2
%
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
2. TVS devices are normally selected according to the working peak reverse voltage (V_RWM), which should be equal or greater than the DC
or continuous peak operating voltage level.
3. V_BR is measured at pulse test current I_T.
4. Pulse waveform per Figure 1.
5. DC is the percentage difference between C_J of lines 1 and 2 measured according to the test conditions given in the electrical characteristics
table.
ORDERING INFORMATION
Device
Package
Shipping^†
ESDONCAN1LT1G
SOT−23
(Pb−Free)
3,000 / Tape & Reel
SESDONCAN1LT1G*
SOT−23
(Pb−Free)
3,000 / Tape & Reel
ESDONCAN1LT3G
SOT−23
(Pb−Free)
10,000 / Tape & Reel
SESDONCAN1LT3G*
SOT−23
(Pb−Free)
10,000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
www.onsemi.com
2