CS3706 Datasheet, PDF (2/8 Pages) Cherry Semiconductor Corporation – Dual Output Driver

Absolute Maximum Ratings
Logic Supply Voltage (V_IN) ...................................................................................................................................................40.0V
Output Supply Voltage (V_CC) ...............................................................................................................................................40.0V
Output Current (each output, source, or sink)
Steady State ...............................................................................................................................................................±500mA
Peak Transient for Less Than 100µs ...........................................................................................................................±1.5A
Capacitive Discharge Energy ......................................................................................................................................20.0µJ
Digital Inputs (INV, NONINV) ..............................................................................................................................................5.5V
Analog Inputs (STOP +, STOP -) ............................................................................................................................................VIN
Inhibit Inputs (INHIBIT A, INHIBIT B, INHIBIT REF)......................................................................................................5.5V
Operating Temperature Range .......................................................................................................................................0 to 70˚C
Storage Temperature Range.......................................................................................................................................-65 to 150˚C
Lead Temperature Soldering
Wave Solder (through hole styles only).....................................................................................10 sec. max, 260°C peak
Notes: All voltages are with respect to the four ground pins which must be connected together. All currents are positive into, neg-
ative out of the specified terminal.
Electrical Characteristics: These specifications apply over the operating temperature range of the IC.
(V_IN = V_CC = 20V, Pins 4, 5, 12 &13 = 0V; unless otherwise stated.)
PARAMETER
TEST CONDITIONS
MIN
TYP
MAX
V_IN Supply Current
V_IN = 40V, V_CC = 20V, INV = 0V,
Unused pins = open.
8
12
V_CC Supply Current
V_CC Leakage Current
Digital Input Low Level
V_IN = 20V, V_CC = 40V, Outputs low
V_IN = 0V, V_CC = 40V
3
5
0.05
0.10
0.8
Digital Input High Level
2.2
Digital Input Current
Digital Input Leakage
Output High Sat., V_C-V_OUT
Output High Sat., V_C-V_OUT
Output Low Sat., V_OUT
Output Low Sat., V_OUT
Inhibit Threshold
Inhibit Threshold
Inhibit Input Current
Analog Threshold
Analog Input Bias Current
Thermal Shutdown
V_I = 0V
V_I = 5V
I_OUT = -50mA
I_OUT = -500mA
I_OUT = 50mA
I_OUT = 500mA
V_REF = 0.5V
V_REF = 3.5V
V_REF = 0V
V_CM = 0V to 15 V
V_I = 0V, V_CM = 15V
Turn on
-0.6
-1.0
0.05
0.10
2.0
2.5
0.4
2.5
0.4
0.6
3.3
3.7
-10
-20
100
130
150
-10
-20
155
Thermal Shutdown
Turn off
125
UNIT
mA
mA
mA
V
V
mA
mA
V
V
V
V
V
V
µA
mV
µA
˚C
˚C
2