CM1213A-04SO_14 Datasheet, PDF (2/6 Pages) ON Semiconductor – 4-Channel Low Capacitance ESD Protection Array

CM1213A−04SO, SZCM1213A−04SO
Table 1. PIN DESCRIPTIONS
Pin Name
Type
Description
1 CH1
I/O
ESD Channel
2
V_N
3 CH2
GND
I/O
Negative Voltage Supply Rail
ESD Channel
4 CH3
I/O
ESD Channel
5
V_P
6 CH4
PWR
I/O
Positive Voltage Supply Rail
ESD Channel
PACKAGE/PINOUT DIAGRAMS
Top View
CH1 1 6 CH4
V_N 2 5 V_P
CH2 3 4 CH3
6−Lead SC−74
SPECIFICATIONS
Table 2. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Units
Operating Supply Voltage (V_P − V_N)
Operating Temperature Range
6.0
V
–40 to +85
°C
Storage Temperature Range
–65 to +150
°C
DC Voltage at any channel input
(V_N − 0.5) to (V_P + 0.5)
V
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
Table 3. STANDARD OPERATING CONDITIONS
Parameter
Rating
Units
Operating Temperature Range
–40 to +85
°C
Package Power Rating
225
mW
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
Table 4. ELECTRICAL OPERATING CHARACTERISTICS (Note 1)
Symbol
Parameter
Conditions
Min Typ Max Units
V_P
I_P
V_F
I_LEAK
C_IN
DC_IO
V_ESD
Operating Supply Voltage (V_P−V_N)
Operating Supply Current
Diode Forward Voltage
Channel Leakage Current
Channel Input Capacitance
Channel I/O ti I/O Capacitance
ESD Protection
Peak Discharge
Voltage at any channel input, in system
Contact discharge per
IEC 61000−4−2 standard
(V_P−V_N) = 3.3 V
I_F = 8 mA; T_A = 25°C
T_A = 25°C; V_P = 5 V, V_N = 0 V
At 1 MHz, V_IN = 0 V (Note 2)
T_A = 25°C (Notes 2 and 3)
3.3 5.5
V
8.0 mA
0.90
V
±0.1 ±1.0 mA
2.0 pF
1.5
pF
kV
±8
V_CL
Channel Clamp Voltage
Positive Transients
Negative Transients
T_A = 25°C, I_PP = 1A, t_P = 8/20 mS
(Note 2)
V
+9.9
–1.6
R_DYN
Dynamic Resistance
Positive Transients
Negative Transients
T_A = 25°C, I_PP = 1A, t_P = 8/20 mS
(Note 2)
W
0.96
0.5
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. All parameters specified at T_A = –40°C to +85°C unless otherwise noted.
2. Standard IEC 61000−4−2 with C_Discharge = 150 pF, R_Discharge = 330 W, V_P = 3.3 V, V_N grounded.
3. These measurements performed with no external capacitor on V_P (V_P floating).
http://onsemi.com
2