English
Language : 

CAT4104 Datasheet, PDF (2/13 Pages) ON Semiconductor – 700 mA Quad Channel Constant Current LED Driver
CAT4104
Table 1. ABSOLUTE MAXIMUM RATINGS
Parameter
Rating
Unit
VIN, RSET, EN/PWM Voltages
−0.3 to 6
V
LED1, LED2, LED3, LED4 Voltages
−0.3 to 25
V
Storage Temperature Range
−65 to +160
_C
Junction Temperature Range
−40 to +150
_C
Lead Temperature
300
_C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
Table 2. RECOMMENDED OPERATING CONDITIONS
Parameter
Rating
Unit
VIN
3.0 to 5.5
V
Voltage applied to LED1 to LED4, outputs off
up to 25
V
Voltage applied to LED1 to LED4, outputs on
up to 6 (Note 2)
V
Ambient Temperature Range
−40 to +85
_C
ILED per LED pin
10 to 175
mA
2. Keeping LEDx pin voltage below 6 V in operation is recommended to minimize thermal dissipation in the package.
NOTE: Typical application circuit with external components is shown on page 1.
Table 3. ELECTRICAL OPERATING CHARACTERISTICS (Min and Max values are over the recommended operating conditions
unless specified otherwise. Typical values are at VIN = 5.0 V, TAMB = 25°C.)
Symbol
Name
Conditions
Min
Typ
Max Units
ILED−ACC LED Current Accuracy
ILED−DEV
LED Channel Matching
VDOUT
VRSET
IQ
Dropout Voltage
RSET Pin Voltage
Quiescent Current
ILEDNOM * ILED
ILEDNOM
±2
%
ILED * ILEDAVG
ILEDAVG
(Note 3)
−5
±1
+5
%
ILED = 175 mA
400
mV
1.17
1.2
1.23
V
No LED, RSET = Float
No LED, RSET = 770 W
0.6
mA
6
IQSHDN
REN/PWM
VHI
VLO
Shutdown Current
EN/PWM Pin
− Internal pull−down resistance
− Logic High Level
− Logic Low Level
VEN = 0 V
1
mA
200
kW
1.3
V
0.4
V
TSD
Thermal Shutdown
150
°C
THYS
Thermal Hysteresis
20
°C
ILED/IRSET RSET to LED Current gain ratio
25 mA LED current
100
VUVLO
Undervoltage lockout (UVLO) threshold
2.0
V
3. Min and Max values are tested for ILED = 50 mA, VIN = 3.5 V, VLEDx = 0.4 V, TAMB = 25°C.
http://onsemi.com
2