|
Z0103MA Datasheet, PDF (1/10 Pages) NXP Semiconductors – Logic level four-quadrant triac | |||
|
Z0103MA, Z0107MA,
Z0109MA
Sensitive Gate Triacs
Series
Silicon Bidirectional Thyristors
Designed for use in solid state relays, MPU interface, TTL logic and
any other light industrial or consumer application. Supplied in an
inexpensive TOâ92 package which is readily adaptable for use in
automatic insertion equipment.
Features
⢠OneâPiece, InjectionâMolded Package
⢠Blocking Voltage to 600 V
⢠Sensitive Gate Triggering in Four Trigger Modes (Quadrants) for all
possible Combinations of Trigger Sources, and especially for Circuits
that Source Gate Drives
⢠All Diffused and Glassivated Junctions for Maximum Uniformity of
Parameters and Reliability
⢠Improved Noise Immunity (dv/dt Minimum of 10 V/msec at 110°C)
⢠Commutating di/dt of 1.6 A/msec at 110°C
⢠High Surge Current of 8 A
⢠These are PbâFree Devices
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol Value Unit
Peak Repetitive Off-State Voltage
(TJ = â40 to +125°C)(1)
Sine Wave 50 to 60 Hz, Gate Open
VDRM,
600
V
VRRM
On-State RMS Current
Full Cycle Sine Wave 50 to 60 Hz
(TC = +50°C)
Peak NonâRepetitive Surge Current
One Full Cycle, Sine Wave 60 Hz
(TC = 110°C)
Circuit Fusing Considerations (t = 8.3 ms)
IT(RMS)
1.0
A
ITSM
8.0
A
I2t
0.35 A2s
Average Gate Power (TC = 80°C, t v 8.3 ms) PG(AV)
1.0
W
Peak Gate Current (t v 20 ms, TJ = +125°C)
IGM
1.0
A
Operating Junction Temperature Range
TJ
â40 to °C
+125
Storage Temperature Range
Tstg
â40 to °C
+150
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. VDRM and VRRM for all types can be applied on a continuous basis. Blocking
voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
http://onsemi.com
TRIACS
1.0 AMPERE RMS
600 VOLTS
MT2
MT1
G
123
STRAIGHT LEAD
BULK PACK
1
2
3
BENT LEAD
TAPE & REEL
AMMO PACK
TOâ92 (TOâ226AA)
CASE 029
STYLE 12
MARKING DIAGRAM
Z01
10xMA
YWW G
G
1 23
x
= 3,7,9
Y
= Year
WW = Work Week
G
= PbâFree Package
(Note: Microdot may be in either location)
PIN ASSIGNMENT
1
Main Terminal 1
2
Gate
3
Main Terminal 2
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2009
1
June, 2009â Rev. 2
Publication Order Number:
Z0103MA/D
|
▷ |