STK681-332-E Datasheet, PDF (1/14 Pages) Sanyo Semicon Device – Thick-Film Hybrid IC Forward/Reverse Motor Driver

Ordering number : ENA1591C
STK681-332-E
Thick-Film Hybrid IC
Forward/Reverse Motor Driver
http://onsemi.com
Overview
The STK681-332-E is a hybrid IC for use in current control forward/reverse DC motor driver with brush.
Applications
 Office photocopiers, printers, etc.
Features
 Allows forward, reverse, and brake operations in accordance with the external input signal.
 12A peak startup output current and 12A peak brake output current.
 On-chip output short-circuit detection function.
 Connecting an external current detection resistor allows overcurrent detection and peak current control in the PWM
operation mode.
 Obviate the need to design for the dead time in order to turn off the upper- and lower drive devices when switching
between the forward and reverse operation mode.
Specifications
Absolute maximum ratings at Tc = 25C
Parameter
Maximum supply voltage 1
Maximum supply voltage 2
Input voltage
Output current1
Output current2
Brake current
Symbol
VCC max
VDD max
VIN max
IO1 max
IO2 max
IOB max
Allowable power dissipation
Operating substrate temperature
Junction temperature
Storage temperature
PdPK max
Tc
Tj max
Tstg
Conditions
VDD=0V
No signal
Logic input pins
VDD=5.0V, DC current
VDD=5.0V, Pulse current: 5ms
VDD=5.0V, square wave current, operating time 15ms
(single pulse, low side brake)
No heat sink
Metal surface temperature of the package
Ratings
unit
52
V
-0.3 to +6.0
V
-0.3 to +6.0
V
8.5
A
12
A
12
A
2.8
W
-20 to +105
C
150
C
-40 to +125
C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
ORDERING INFORMATION
See detailed ordering and shipping information on page 14 of this data sheet.
Semiconductor Components Industries, LLC, 2013
June, 2013
61913HK 013-13-0024/70611HKPC/22311HKIM/N1809HKIM No. A1591-1/14