STK672-220-E Datasheet, PDF (1/10 Pages) Sanyo Semicon Device – Thick-Film Hybrid IC Unipolar Constant-Current Chopper Two-Phase Stepping Motor Driver Output Current 2.8A

Ordering number : EN7465A
STK672-220-E
Thick-Film Hybrid IC
Unipolar Constant-Current Chopper
Two-Phase Stepping Motor Driver
Output Current 2.8A
http://onsemi.com
Overview
The STK672-220-E is two-phase stepping motor driver hybrid IC (HIC) that features further miniaturization and
improved input logic flexibility as compared to the STK6713 series products.
Applications
• The STK672-220-E is optimal for use as a stepping motor driver in printers, copiers, XY plotters, and similar
equipment.
Features
• Built-in common-mode input protection circuit.
• The input signal logic lines are provided as active-high and active-low pairs, and thus support switching the motor
wiring.
• Built-in current detection resistor for reduced external component mounting area on the printed circuit board.
• Inhibit pin (cuts off the motor current)
• Wide motor operating range (10 to 45V)
Semiconductor Components Industries, LLC, 2013
June, 2013
71608HKIM/61504TN (OT) No.7465-1/10