STK621-061-E Datasheet, PDF (1/8 Pages) Sanyo Semicon Device – 3-phase Inverter Motor Drive Inverter Hybrid IC

Ordering number : ENA1032A
STK621-061-E
Thick-Film Hybrid IC
3-Phase Motor Drive
Inverter Hybrid IC
http://onsemi.com
Overview
This IC is a 3-phase inverter power hybrid IC containing power elements (IGBT and FRD), pre-driver, overcurrent and
excessive temperature protection circuit.
Application
• 3-phase inverter motor drive
Features
• Integrates power elements (IGBT and FRD), pre-driver, and protective circuit.
• Protective circuits including overcurrent (bus line), excessive temperature and pre-drive low voltage protection are
built in.
• Direct input of CMOS level control signals without an insulating circuit (photocoupler, etc) is possible.
• Single power supply drive is possible by using a bootstrap circuit with a built-in IC
• Temperature monitor is possible by the thermistor inside the IC
• Built-in simultaneous upper/lower ON prevention circuit to prevent arm shorting through simultaneous ON input for
the upper and lower side transistors.
(Dead time is required for preventing shorting due to switching delay.)
• SIP (The single in-line package) of the transfer full mold structure.
Semiconductor Components Industries, LLC, 2013
July, 2013
O0312HKPC 013-06-0028 No.A1032-1/8