STK433-040N-E Datasheet, PDF (1/11 Pages) Sanyo Semicon Device – 2channel class-AB Audio Power IC

Ordering number : ENA2101A
STK433-040N-E
Thick-Film Hybrid IC
2ch class-AB Audio Power IC
40W+40W
http://onsemi.com
Overview
The STK433-040N-E is a hybrid IC designed to be used in 40W  2ch class AB audio power amplifiers.
Application
 Audio Power amplifiers
Features
 Pin-to-pin compatible outputs ranging from 40W to 150W.
 Miniature package.
 Output load impedance: RL = 6 recommended.
 Allowable load shorted time: 0.3 second
 Allows the use of predesigned applications for standby and mute circuit.
Series model
STK433-040N-E
STK433-060N-E
STK433-130N-E
Output1 (10%/1kHz)
40W  2ch
50W  2ch
150W  2ch
Output2 (0.4%/20Hz to 20kHz)
25W  2ch
35W  2ch
100W  2ch
Max. rating VCC (quiescent)
Max. rating VCC (6)
Recommended operating VCC (6)
Dimensions (excluding pin height)
38V
46V
36V
40V
24V
27V
47.0mm25.6mm9.0mm
71.5V
63V
44V
67.0mm25.6mm9.0mm
Output1 (10%/1kHz)
Output2 (0.4%/20Hz to 20kHz)
Max. rating VCC (quiescent)
Max. rating VCC (6)
Recommended operating VCC (6)
Dimensions (excluding pin height)
STK433-330N-E
150W  3ch
100W  3ch
71.5V
63V
44V
64.0mm36.6mm9.0mm
STK433-840N-E
40W  4ch
25W  4ch
38V
36V
25V
64.0mm31.1mm9.0mm
STK433-890N-E
80W  4ch
50W  4ch
54V
47V
34V
78.0mm44.1mm9.0mm
Specifications
Absolute Maximum Ratings at Ta = 25C, Tc = 25C unless otherwise specified
Parameter
Symbol
Conditions
Ratings
Unit
Maximum power supply voltage
Minimum operation supply voltage
#13 Operating voltage
*5
VCC max (0)
VCC max (1)
VCC max (2)
VCC min
VST OFF max
Non- signal
Signal, RL  6
Signal, RL  4
#13 voltage
38
V
36
V
30
V
10
V
-0.3 to +5.5
V
Thermal resistance
Junction temperature
Operating substrate temperature
Storage temperature
Allowable time for load short-circuit
*4
j-c
Tj max
Tc max
Tstg
ts
Per one power transistor
Should satisfy Tj max and Tc max
VCC = 24V, RL = 6, f = 50Hz
PO = 25W, 1ch drive
4.2
150
125
-30 to +125
0.3
C/W
C
C
C
s
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
ORDERING INFORMATION
See detailed ordering and shipping information on page 11 of this data sheet.
Semiconductor Components Industries, LLC, 2013
April, 2013
41713HK/80112HKPC 018-11-0086 No.A2101-1/11