SS30 Datasheet, PDF (1/7 Pages) Sanyo Semicon Device – For Notebook PC Fan Motor Driver

Ordering number : ENA1878
SS30
Bi-CMOS IC
For Notebook PC
Fan Motor Driver
http://onsemi.com
Overview
The SS30 is a 3 phase all wave sensor-less motor driver for notebook PC fans.
Feature
• Direct PWM 3 phase all wave sensor-less motor driver
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter
Symbol
Conditions
Ratings
Unit
Power supply voltage
Pre-drive voltage (gate voltage)
VCC max
VG max
6.5
V
10
V
Output pin current
PWM input pin withstand voltage
FG output pin withstand voltage
FG output current
1/2FG output pin withstand voltage
1/2FG output current
RD output pin withstand voltage
RD output current
Power dissipation 1
IOUT max
VPWM max
VFG max
IFG max
V1/2FG max
I1/2FG max
VRD max
IRD max
Pd max1
Independent IC
0.7
A
VCC
V
6.0
V
5.0
mA
6.0
V
5.0
mA
6.0
V
5.0
mA
0.2
W
Power dissipation 2
Pd max2
Mounted on specified board *1
1.05
W
Operating temperature
Topr
*2
-30 to +95
°C
Storage temperature
Tstg
-55 to +150
°C
*1 : When mounted on 40.0mm×50.0mm×0.8mm glass epoxy 4 Layer 2S2P board
*2 : Tj max = 150°C. Use the IC in the range where the temperature of the chip does not exceed Tj = 150°C during operation.
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating
Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
Recommended Operating Conditions at Ta = 25°C
Parameter
Power supply voltage
Symbol
VCC
Conditions
Ratings
Unit
2.2 to 6.0
V
Semiconductor Components Industries, LLC, 2013
May, 2013
D0110 SY 20080710-S00004 No.A1878-1/7