SRV05-4MR6 Datasheet, PDF (1/9 Pages) ON Semiconductor – Transient Voltage Suppressors ESD Protection Diodes with Low Clamping Voltage

SRV05-4MR6
Transient Voltage
Suppressors
ESD Protection Diodes with Low
Clamping Voltage
The SRV05−4MR6 transient voltage suppressor is designed to
protect high speed data lines from ESD, EFT, and lighting.
Features
• Protects 4 I/O Lines
• Low Working Voltage: 5 V
• Low Clamping Voltage
• Low Capacitance (<5 pF) for High Speed Interfaces
• Transient Protection for High Speed Lines to:
IEC61000−4−2 (ESD) ±15 kV (air), ±8 kV (contact)
IEC61000−4−4 (EFT) 40 A
IEC61000−4−5 (Lightning) 12 A
• TSOP−6 is Footprint Compatible with SOT−23 6 Lead,
SC−59 6 Lead and SC−74
• UL Flammability Rating of 94 V−0
• This is a Pb−Free Device
Typical Applications
• High Speed Communication Line Protection
• USB 1.1 and 2.0 Power and Data Line Protection
• Digital Video Interface (DVI)
• Monitors and Flat Panel Displays
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Power Dissipation
8 x 20 ms @ T_A = 25°C (Note 1)
P_pk
300
W
Operating Junction Temperature Range
T_J
−55 to +125 °C
Storage Temperature Range
T_stg
−55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
T_L
260
°C
Human Body Model (HBM)
Machine Model (MM)
IEC 61000−4−2 Air (ESD)
IEC 61000−4−2 Contact (ESD)
ESD
16000
V
400
15000
8000
IEC 61000−4−4 (5/50 ns)
EFT
40
A
IEC 61000−4−5 (8 x 20 ms)
−
12
A
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Non−repetitive current pulse per Figure 5 (Pin 5 to Pin 2)
See Application Note AND8308/D for further description of
survivability specs.
© Semiconductor Components Industries, LLC, 2009
1
November, 2009 − Rev. 0
http://onsemi.com
LOW CAPACITANCE
TVS ARRAY
300 WATTS PEAK POWER
6 VOLTS
PIN CONFIGURATION
AND SCHEMATIC
I/O 1
V_N 2
I/O 3
6 I/O
5 V_P
4 I/O
6
1
TSOP−6
CASE 318G
PLASTIC
MARKING DIAGRAM
63 G
G
63 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation may vary
depending upon manufacturing location.
ORDERING INFORMATION
Device
Package
Shipping
SRV05−4MR6T1G TSOP−6 3000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Publication Order Number:
SRV05−4MR6/D