SN74LS365A Datasheet, PDF (1/4 Pages) ON Semiconductor – LOW POWER SCHOTTKY

SN74LS365A SN74LS367A
SN74LS368A
3-State Hex Buffers
These devices are high speed hex buffers with 3-state outputs. They
are organized as single 6-bit or 2-bit / 4-bit, with inverting or
non-inverting data (D) paths. The outputs are designed to drive 15
TTL Unit Loads or 60 Low Power Schottky loads when the Enable (E)
is LOW.
When the Output Enable (E) is HIGH, the outputs are forced to a
high impedance “off” state. If the outputs of the 3-state devices are tied
together, all but one device must be in the high impedance state to
avoid high currents that would exceed the maximum ratings.
Designers should ensure that Output Enable signals to 3-state devices
whose outputs are tied together are designed so there is no overlap.
GUARANTEED OPERATING RANGES
Symbol
Parameter
Min Typ Max Unit
V_CC
Supply Voltage
T_A
Operating Ambient
Temperature Range
4.75 5.0 5.25
V
0
25
70
°C
I_OH
Output Current – High
I_OL
Output Current – Low
– 2.6 mA
24
mA
http://onsemi.com
LOW
POWER
SCHOTTKY
16
1
PLASTIC
N SUFFIX
CASE 648
16
1
SOIC
D SUFFIX
CASE 751B
ORDERING INFORMATION
Device
Package
Shipping
SN74LS365AN 16 Pin DIP 2000 Units/Box
SN74LS365AD
16 Pin
2500/Tape & Reel
SN74LS367AN 16 Pin DIP 2000 Units/Box
SN74LS367AD
16 Pin
2500/Tape & Reel
SN74LS368AN 16 Pin DIP 2000 Units/Box
SN74LS368AD
16 Pin
2500/Tape & Reel
© Semiconductor Components Industries, LLC, 1999
1
December, 1999 – Rev. 6
Publication Order Number:
SN74LS365A/D