R3110 Datasheet, PDF (1/14 Pages) ON Semiconductor – Pre-fit DSP Solution

RHYTHM R3110
Pre-fit DSP Solution for
Hearing Aids
Introduction
The RHYTHMt R3110 hybrid from ON Semiconductor is a
pre−fit DSP system that is based on a two−channel compression circuit
and designed for entry level hearing aids. With no need for software
configuration nor that of storing audiology parameters via computer
fitting, R3110 is a simple, cost−effective solution with many features
found in high−end hearing aids, including Adaptive Noise Reduction
and Adaptive Feedback Cancellation. R3110 is targeted at replacing
aging analog solutions; it offers the same ease of use, yet provides the
superior performance of digital technology. In its simplest
configuration, a hearing aid build using R3110 only requires four
external electronic components.
Key Features and Benefits
• Pre−Fit Audiology Parameters− All sound−processing algorithms
are preprogrammed to enable manufacturers to develop hearing aids
in a variety of form−factors and to fit a wide range of hearing loss
profiles. The device can also be configured for additional use−cases
through hardware settings.
• Trimmer−Based Fitting− Up to four trimmers can be deployed,
offering manufacturers the capability to modify most parameters that
are important for patient fitting.
• Mode Control− Provides a variety of user control options:
momentary or static switches, as well as an analog volume control.
• Adaptive Feedback Canceller− Automatically reduces acoustic
feedback. It allows for an increase in stable gain while minimizing
artifacts for music and tonal input signals
• Automatic Telecoil Support− Supports the use of telecoil devices,
enabled either automatically with a magnetic sensitive switch or via
an external switch
• Adaptive Noise Reduction− The adaptive noise reduction algorithm
monitors signal and noise activities in 32 individual bands and
carefully reduces noise
• Tinnitus Masking− A noise source can be enabled to mask tinnitus.
The noise level is adjustable and mixed with the audio path. Spectral
shaping is also possible using the high−cut and low−cut filters.
www.onsemi.com
21−PAD HYBRID
CASE 127DF
PIN NUMBERING
15 16 1
14 17 2
13 18 3
12 19 4
11 20 5
10 21 6
9 87
(Bottom View)
MARKING DIAGRAM
R3110−CBAA
######
R3110−CBAA = Specific Device Code
## = Work Order Number
ORDERING INFORMATION
See detailed ordering and shipping information on page 13 of
this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
February, 2015 − Rev. 1
Publication Order Number:
R3110/D