|
PM6600 Datasheet, PDF (1/43 Pages) ON Semiconductor – 6-rows 30 mA LEDs driver with boost regulator for LCD panels backlight | |||
|
PM6600
6-rows 30 mA LEDs driver with boost regulator
for LCD panels backlight
Features
â Boost section
â 4.7 V to 28 V input voltage range
â Internal power MOSFET
â Internal +5 V LDO for device supply
â Up to 36 V output voltage
â Constant frequency peak current-mode
control
â 200 kHz to 1 MHz adjustable switching
frequency
â External synchronization for multi-device
application
â Pulse-skip power saving mode at light load
â Programmable soft-start
â Programmable OVP protection
â Stable with ceramic output capacitors
â Thermal shutdown
â Backlight driver section
â Six rows with 30 mA maximum current
capability (adjustable)
â Up to 10 WLEDs per row
â Unused rows detection
â 500 ns minimum dimming time (1 %
minimum dimming duty-cycle at 20 kHz)
â ±2.1 % current accuracy
â ±2 % current matching between rows
â LED failure (open and short circuit)
detection
VFQFPN-24 4x4
Description
The PM6600 consists of a high efficiency
monolithic boost converter and six controlled
current generators (ROWs), specifically designed
to supply LEDs arrays used in the backlight of
LCD panels. The device can manage a nominal
output voltage up to 36 V (i.e. 10 White-LEDs per
ROW). The generators can be externally
programmed to sink up to 30 mA and they can be
dimmed via a PWM signal (1% dimming duty-
cycle at 20 kHz can be managed). The device
allows to detect and manage the open and
shorted LED faults and to let unused ROWs
floating. Basic protections (Output Over-Voltage,
internal MOSFET Over-Current and Thermal
Shutdown) are provided.
Applications
â Notebook monitors backlight
â UMPC backlight
Table 1. Device summary
Part number
PM6600
PM6600TR
Package
VFQFPN-24 4x4 (exposed pad)
Packaging
Tube
Tape and reel
January 2008
Rev 2
1/43
www.st.com
|
▷ |