P3P816711A Datasheet, PDF (1/4 Pages) ON Semiconductor – Spread Spectrum Peak EMI Reduction Device

P3P816711A
Spread Spectrum Peak EMI
Reduction Device
Description
P3P816711A generates a 1x LVCMOS low EMI Spread Spectrum
clock of the input. The device accepts an AC or DC coupled external
clock input at CLKIN. It reduces electromagnetic interference (EMI)
at the clock source, allowing system wide reduction of EMI of down
stream clock and data dependent signals. It allows significant system
cost savings by reducing the number of circuit board layers, ferrite
beads, shielding, and other passive components that are traditionally
required to pass EMI regulations.
P3P816711A use the most efficient and optimized modulation
profile approved by the FCC and is implemented in a proprietary
all-digital method.
P3P816711A operates over a V_DD range of 3.3 V ± 10% and is
available in TSOP−6 package over a temperature range of 0°C to
+70°C. P3I816711A operates over a temperature range of −40°C to
+85°C.
Application
The P3P816711A is targeted towards EMI management in
consumer electronics applications including Set Top Box.
Features
• 1x Low EMI Spread Spectrum Clock of the Input
• External Reference Input Clock: 30 MHz
• Output Clock: 30 MHz ± 0.3%(typ)
• Low Inherent Cycle-to-Cycle Jitter
• Supply Voltage: 3.3 V ± 10%
• LVCMOS Input and Output
• Available in TSOP−6 (6 Lead TSOT−23)
• Operating Temperature Range: −40°C to +85°C
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
http://onsemi.com
MARKING
DIAGRAM
TSOP−6
BM1 MG
CASE 318G
G
1
1
BM1 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONFIGURATION
1
NC
ModOUT
GND
P3P
816711A
V_DD
CLKIN
NC
(Top View)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 3 of this data sheet.
© Semiconductor Components Industries, LLC, 2011
1
August, 2011 − Rev. 0
Publication Order Number:
P3P816711A/D