|
NZF220DFT1 Datasheet, PDF (1/4 Pages) ON Semiconductor – EMI Filter with ESD Protection | |||
|
NZF220DFT1
EMI Filter with ESD
Protection
Features
⢠2 EMI/RFI Biâdirectional âPiâ LowâPass Filters
⢠ESD Protection Meets IEC61000â4â2
⢠Diode Capacitance: 7 â 10 pF
⢠Zener/Resistor Line Capacitance: 22 ±20% pF
⢠Low Zener Diode Leakage: 1 mA Maximum
⢠Zener Breakdown Voltage; 6 â 8 V
⢠PbâFree Package is Available
Benefits
⢠Designed to suppress EMI/RFI Noise in Systems Subjected to
Electromagnetic Interference
⢠Nominal Cutoff Frequency of 220 MHz (per Figure 2)
⢠Small Package Size Minimizes Parasitic Inductance, Thus a More
âIdealâ Low Pass Filtering Response
Typical Applications
⢠Cellular Phones
⢠Communication Systems
⢠Computers
⢠Portable Products with Input/Output Conductors
http://onsemi.com
CIRCUIT DESCRIPTION
Pin 4
Pin 5
Pin 3
Pin 2
(GND)
Pin 1
SCâ88A
DF SUFFIX
CASE 419A
MAXIMUM RATINGS
Rating
Symbol Value
Unit
Peak Power Dissipation (Note 1)
8 Ã 20 ms Pulse
PPK
14
W
Maximum Junction Temperature
TJ
150
°C
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
1. Between I/O Pins
MARKING DIAGRAM
5
4
NZF D
1 23
NZF = Specific Device Code
D
= Date Code
ORDERING INFORMATION
Device
Package
Shippingâ
NZF220DFT1 SCâ88A 3000/Tape & Reel
NZF220DFT1G SCâ88A 3000/Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2004
1
July, 2004 â Rev. 7
Publication Order Number:
NZF220DFT1/D
|
▷ |