NZ9F2V4T5G_16 Datasheet, PDF (1/4 Pages) ON Semiconductor – Zener Voltage Regulators

NZ9F2V4T5G,
SZNZ9F2V4T5G SERIES
Zener Voltage Regulators
250 mW SOD−923 Surface Mount
This series of Zener diodes is packaged in a SOD−923 surface
mount package. They are designed to provide voltage regulation
protection and are especially attractive in situations where space is at a
premium. They are well suited for applications such as cellular
phones, hand held portables, and high density PC boards.
Specification Features:
• Standard Zener Breakdown Voltage Range − 2.4 V to 24 V
• Steady State Power Rating of 250 mW
• Small Body Outline Dimensions:
0.039″ x 0.024″ (1.00 mm x 0.60 mm)
• Low Body Height: 0.016″ (0.40 mm)
• ESD Rating of Class 3 (>16 kV) per Human Body Model
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Mechanical Characteristics:
CASE: Void-free, transfer-molded, thermosetting plastic
Epoxy Meets UL 94 V−0
LEAD FINISH: 100% Matte Sn (Tin)
MOUNTING POSITION: Any
QUALIFIED MAX REFLOW TEMPERATURE: 260°C
Device Meets MSL 1 Requirements
MAXIMUM RATINGS
Rating
Symbol Max
Unit
Total Device Dissipation FR−5 Board,
(Note 1) @ T_A = 25°C
Derate above 25°C
P_D
250
mW
2.0 mW/°C
Thermal Resistance from
Junction−to−Ambient
R_qJA
500
°C/W
Junction and Storage Temperature Range T_J, T_stg −65 to
°C
+150
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. FR−4 Minimum Pad.
www.onsemi.com
1
Cathode
2
Anode
2
1
SOD−923
CASE 514AB
MARKING
DIAGRAM
X MG
G
1
2
X = Specific Device Code
M = Month Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping†
NZ9FxxxxT5G, SOD−923 8000/Tape & Reel
SZNZ9FxxxxT5G (Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
DEVICE MARKING INFORMATION
See specific marking information in the device marking
column of the Electrical Characteristics tables starting on
page 3 of this data sheet.
© Semiconductor Components Industries, LLC, 2016
1
November, 2016 − Rev. 4
Publication Order Number:
NZ9F2V4/D