NUS3065MU Datasheet, PDF (1/10 Pages) ON Semiconductor – Low Profile Overvoltage Protection IC with Integrated MOSFET

NUS3065MU
Low Profile Overvoltage
Protection IC with
Integrated MOSFET
This device represents a new level of safety and integration by
combining the NCP345 overvoltage protection circuit (OVP) with a
30 V P−channel power MOSFET. It is specifically designed to protect
sensitive electronic circuitry from overvoltage transients and power
supply faults. During such hazardous events, the IC quickly
disconnects the input supply from the load, thus protecting the load
before any damage can occur.
The OVP IC is optimized for applications that use an external
AC−DC adapter or a car accessory charger to power a portable product
or recharge its internal batteries. It has a nominal overvoltage
threshold of 6.85 V which makes them ideal for single cell Li−Ion as
well as 3/4 cell NiCD/NiMH applications.
Features
• OvervoltageTurn−Off Time of Less Than 1.0 ms
• Accurate Voltage Threshold of 6.85 V, Nominal
• Undervoltage Lockout Protection; 2.8 V, Nominal
• High Accuracy Undervoltage Threshold of 2.0%
• −30 V Integrated P−Channel Power MOSFET
• Low R_DS(on) = 66 mW @ −4.5 V
• Low Profile 0.55 mm height, 2.5 X 3.0 mm LLGA Package Suitable
for Portable Applications
• Maximum Solder Reflow Temperature @ 260°C
• This device is manufactured with a Pb−Free external lead finish only.
• This is a Pb−Free Device
Benefits
• Provide Battery Protection
• Integrated Solution Offers Cost and Space Savings
• Integrated Solution Improves System Reliability
Applications
• Portable Computers and PDAs
• Cell Phones and Handheld Products
• Digital Cameras
http://onsemi.com
MARKING
DIAGRAM
8
1
TLLGA8
3065
CASE 517AH ^AYWW
1
G
3065
A
Y
WW
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
PIN CONNECTIONS
VCC ⁸
OUT 7
GATE 6
SRC 5
DRAIN
4
1 IN
2 GND
3 CNTRL
4 DRAIN
(Bottom View)
ORDERING INFORMATION
Device
Package
Shipping^†
NUS3065MUTAG TLLGA8
(Pb−Free)
3000 /
Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2007
March, 2007 − Rev. 0
Publication Order Number:
NUS3065/D