|
NUP4202W1_09 Datasheet, PDF (1/9 Pages) ON Semiconductor – Transient Voltage Suppressors | |||
|
NUP4202W1
Transient Voltage
Suppressors
ESD Protection Diodes with Low
Clamping Voltage
The NUP4202W1 transient voltage suppressor is designed to
protect high speed data lines from ESD, EFT, and lightning.
Features
⢠Low Clamping Voltage
⢠StandâOff Voltage: 5 V
⢠Low Leakage
⢠Protection for the Following IEC Standards:
IEC 61000â4â2 Level 4 ESD Protection
⢠UL Flammability Rating of 94 Vâ0
⢠This is a PbâFree Device
Typical Applications
⢠High Speed Communication Line Protection
⢠USB 1.1 and 2.0 Power and Data Line Protection
⢠Digital Video Interface (DVI) and HDMI
⢠Monitors and Flat Panel Displays
⢠MP3
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Power Dissipation
8 x 20 mS @ TA = 25°C (Note 1)
Ppk
500
W
Operating Junction Temperature Range
TJ
â40 to +125 °C
Storage Temperature Range
Tstg
â55 to +150 °C
Lead Solder Temperature â
Maximum (10 Seconds)
TL
260
°C
Human Body Model (HBM)
Machine Model (MM)
IEC 61000â4â2 Air (ESD)
IEC 61000â4â2 Contact (ESD)
ESD
16000
V
400
20000
20000
IEC 61000â4â4 (5/50 ns)
EFT
40
A
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Nonrepetitive current pulse per Figure 5 (Pin 5 to Pin 2).
See Application Note AND8308/D for further description of
survivability specs.
http://onsemi.com
SCâ88 LOW CAPACITANCE
DIODE TVS ARRAY
500 WATTS PEAK POWER
6 VOLTS
PIN CONFIGURATION
AND SCHEMATIC
I/O 1
VN 2
I/O 3
6 I/O
5 VP
4 I/O
1
SCâ88
CASE 419B
PLASTIC
MARKING DIAGRAM
6
63 MG
G
1
63 = Specific Device Code
M = Date Code
G = PbâFree Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping
NUP4202W1T2G SCâ88 3000/Tape & Reel
(PbâFree)
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2009
1
September, 2009 â Rev. 3
Publication Order Number:
NUP4202W1/D
|
▷ |