NUP4201DR2_08 Datasheet, PDF (1/8 Pages) ON Semiconductor – Low Capacitance Surface Mount TVS for High-Speed Data Interfaces

NUP4201DR2
Low Capacitance Surface
Mount TVS for High-Speed
Data Interfaces
The NUP4201DR2 transient voltage suppressor is designed to
protect equipment attached to high speed communication lines from
ESD, EFT, and lightning.
Features
• SO−8 Package
• Peak Power − 500 Watts 8 x 20 mS
• ESD Rating:
IEC 61000−4−2 (ESD) 15 kV (air) 8 kV (contact)
IEC 61000−4−4 (EFT) 40 A (5/50 ns)
IEC 61000−4−5 (lightning) 25 A (8/20 ms)
• UL Flammability Rating of 94 V−0
• Pb−Free Package is Available
Typical Applications
• High Speed Communication Line Protection
• USB Power and Data Line Protection
• Video Line Protection
• Base Stations
• HDSL, IDSL Secondary IC Side Protection
• Microcontroller Input Protection
MAXIMUM RATINGS
Rating
Symbol Value
Unit
Peak Power Dissipation
8 x 20 mS @ T_A = 25°C (Note 1)
P_pk
500
W
Junction and Storage Temperature Range T_J, T_stg −55 to +150 °C
Lead Solder Temperature −
Maximum 10 Seconds Duration
T_L
260
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Non−repetitive current pulse 8 x 20 mS exponential decay waveform
© Semiconductor Components Industries, LLC, 2008
1
August, 2008 − Rev. 6
http://onsemi.com
SO−8 LOW CAPACITANCE
VOLTAGE SUPPRESSOR
500 WATTS PEAK POWER
6 VOLTS
PIN CONFIGURATION
AND SCHEMATIC
I/O 1 1
REF 1 2
REF 1 3
I/O 2 4
8 REF 2
7 I/O 4
6 I/O 3
5 REF 2
8
1
SOIC−8
CASE 751
PLASTIC
MARKING DIAGRAM
8
P4201
AYWWG
G
1
P4201 = Device Code
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping^†
NUP4201DR2
SO−8 2500/Tape & Reel
NUP4201DR2G SO−8 2500/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
Publication Order Number:
NUP4201DR2/D