English
Language : 

NUP4114 Datasheet, PDF (1/9 Pages) ON Semiconductor – Transient Voltage Suppressors
NUP4114 Series,
SZNUP4114 Series
Transient Voltage
Suppressors
ESD Protection Diodes with Low
Clamping Voltage
The NUP4114 transient voltage suppressors are designed to protect
high speed data lines from ESD. Ultra−low capacitance and high level
of ESD protection make these devices well suited for use in USB 2.0
high speed applications.
Features
• Low Clamping Voltage
• Small Body Outline Dimensions on SC−88 Package:
0.082″ x 0.078″ (2.10 mm x 1.25 mm)
• Low Body Height: 0.043″ (1.10 mm)
• Stand−off Voltage: 5.5 V
• Low Leakage
• Response Time is Typically < 1.0 ns
• IEC61000−4−2 Level 4 ESD Protection
• These Devices are Pb−Free and are RoHS Compliant
• AEC−Q101 Qualified and PPAP Capable − SZNUP4114
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements
Typical Applications
• LVDS
• USB 2.0 High Speed Data Line and Power Line Protection
• Digital Video Interface (DVI) and HDMI
• Monitors and Flat Panel Displays
• High Speed Communication Line Protection
• Notebook Computers
• Gigabit Ethernet
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range
TJ
−40 to +125 °C
Storage Temperature Range
Tstg
−55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
TL
260
°C
IEC 61000−4−2 (ESD)
Contact
Air
±8
kV
±15
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
http://onsemi.com
5
1
6
3
4
2
MARKING
DIAGRAMS
6
SC−88
W1 SUFFIX
1
CASE 419B
X2 MG
G
1
6
SC−88
W1 SUFFIX
1
CASE 419B
X4 MG
G
1
6
TSOP−6
CASE 318G
1
STYLE 12
P4H MG
G
1
6
1
SOT−563
CASE 463A
P4MG
G
1
XXX = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
See Application Note AND8308/D for further description of survivability specs.
© Semiconductor Components Industries, LLC, 2014
1
September, 2014 − Rev. 3
Publication Order Number:
NUP4114/D