NUP4060AXV6 Datasheet, PDF (1/4 Pages) ON Semiconductor – 4−Line Transient Voltage Suppressor Array

NUP4060AXV6
4−Line Transient Voltage
Suppressor Array
This 4−line voltage transient suppressor array is designed for
application requiring transient voltage protection capability. It is
intended for use in over−transient voltage and ESD sensitive
equipment such as cell phones, portables, computers, printers and
other applications. This device features a common cathode design
which protects four independent lines in a single SOT−563 package.
Features
• Protects up to 4 Lines in a Single SOT−563 Package
• ESD Rating: IEC61000−4−2: Level 4
Contact (8 kV), Air (15 kV)
• V_CC Pin = 16 V Protection
D1, D2, and D3 Pins = 6.8 V Protection
• Low Capacitance (< 7 pF @ 3 V) for D₁, D₂, and D₃
• This is a Pb−Free Device
Applications
• Hand Held Portable Applications
• USB Interface
• Notebooks, Desktops, Servers
• SIM Card Protection
MAXIMUM RATINGS (T_J = 25°C, unless otherwise specified)
Symbol
Rating
Value Unit
P_PK 1
T_J
T_STG
T_L
Peak Power Dissipation
V_CC Diode
200
W
8x20 msec double exponential waveform,
(Note 1)
D₁, D₂, and D₃
20
W
Operating Junction Temperature Range
−40 to 125 °C
Storage Temperature Range
−55 to 150 °C
Lead Solder Temperature – Maximum
(10 seconds)
260
°C
ESD
IEC 61000−4−2 Air
IEC 61000−4−2 Contact
15000
V
8000
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Nonrepetitive current pulse per Figure 1.
http://onsemi.com
SOT−563 4−LINE TRANSIENT
VOLTAGE SUPPRESSOR
PIN ASSIGNMENT
D₁ 1
D₂ 2
V_{CC 3}
6 GND
5 D₃
4 GND
MARKING
DIAGRAM
6
1
SOT−563
CASE 463A
STYLE 6
MT MG
G
1
MT = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping^†
NUP4060AXV6T1G SOT−563 4000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2007
1
January, 2007 − Rev. 1
Publication Order Number:
NUP4060/D