NUP4012PMU Datasheet, PDF (1/3 Pages) ON Semiconductor – Quad Transient Voltage Suppressor Array

NUP4012PMU
Quad Transient Voltage
Suppressor Array
ESD Protection Diodes with Ultra−Low
(0.7 pF) Capacitance
The four−line voltage transient suppressor array is designed to protect
voltage−sensitive components that require ultra−low capacitance from
ESD and transient voltage events. This device features a common anode
design which protects four independent high speed data lines in a single
six−lead UDFN low profile package.
Excellent clamping capability, low capacitance, low leakage, and fast
response time make these parts ideal for ESD protection on designs
where board space is at a premium. Because of its low capacitance, it is
suited for use in high frequency designs.
Features
• Low Capacitance Data Lines (0.7 pF Typical)
• Protects up to Four Data Lines
• UDFN Package, 1.6 x 1.6 mm
• Low Profile of 0.50 mm for Ultra Slim Design
• ESD Rating: IEC61000−4−2: Level 4
− Contact (14 kV)
• D₁, D₂, D₃ and D₄ Pins = 5.2 V Minimum Protection
• RoHS Compliant
• This is a Pb−Free Device
Typical Applications
• USB 2.0 High−Speed Interface
• Cell Phones
• MP3 Players
• SIM Card Protection
MAXIMUM RATINGS (T_J = 25°C, unless otherwise specified)
Symbol
Rating
Value Unit
T_J
T_STG
T_L
Operating Junction Temperature Range
Storage Temperature Range
Lead Solder Temperature – Maximum
(10 seconds)
−40 to 125 °C
−55 to 150 °C
260
°C
ESD
IEC 61000−4−2 Contact
14000
V
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
http://onsemi.com
D₁ D₂ D₃ D₄
MARKING
DIAGRAM
6
UDFN6 1.6x1.6
MU SUFFIX
1
P7 MG
1
CASE 517AP
G
P7 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
PIN CONNECTIONS
D₁ 1
NC 2
D₂ 3
GND
6 D₄
5 NC
4 D₃
ORDERING INFORMATION
Device
Package
Shipping^†
NUP4012PMUTAG UDFN6 3000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2008
1
November, 2008− Rev. 1
Publication Order Number:
NUP4012PMU/D