NUP2201MR6_13 Datasheet, PDF (1/8 Pages) ON Semiconductor – Transient Voltage Suppressors

NUP2201MR6,
SZNUP2201MR6
Transient Voltage
Suppressors
ESD Protection Diodes with Low
Clamping Voltage
The NUP2201MR6 transient voltage suppressor is designed to
protect high speed data lines from ESD, EFT, and lightning.
Features
• Low Clamping Voltage
• Stand−Off Voltage: 5 V
• Low Leakage
• Protection for the Following IEC Standards:
IEC 61000−4−2 Level 4 ESD Protection
• UL Flammability Rating of 94 V−0
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• High Speed Communication Line Protection
• USB 1.1 and 2.0 Power and Data Line Protection
• Digital Video Interface (DVI)
• Monitors and Flat Panel Displays
MAXIMUM RATINGS (T_J = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Power Dissipation
8 x 20 mS @ T_A = 25°C (Note 1)
P_pk
500
W
Operating Junction Temperature Range
T_J
−40 to +125 °C
Storage Temperature Range
T_stg
−55 to +150 °C
Lead Solder Temperature −
Maximum (10 Seconds)
T_L
235
°C
Human Body Model (HBM)
Machine Model (MM)
IEC 61000−4−2 Air (ESD)
IEC 61000−4−2 Contact (ESD)
ESD
16000
V
400
20000
20000
IEC 61000−4−4 (5/50 ns)
EFT
40
A
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Non−repetitive current pulse per Figure 5 (Pin 5 to Pin 2)
See Application Note AND8308/D for further description of
survivability specs.
http://onsemi.com
TSOP−6 LOW CAPACITANCE
DIODE TVS ARRAY
500 WATTS PEAK POWER
6 VOLTS
PIN CONFIGURATION
AND SCHEMATIC
I/O 1
V_N 2
N/C 3
6 I/O
5 V_P
4 N/C
1
TSOP−6
CASE 318G
MARKING DIAGRAM
6
62 MG
G
1
62 = Specific Device Code
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package Shipping^†
NUP2201MR6T1G
TSOP−6 3000 / Tape &
(Pb−Free)
Reel
SZNUP2201MR6T1G TSOP−6 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2013
1
February, 2013 − Rev. 4
Publication Order Number:
NUP2201MR6/D