NUF8152 Datasheet, PDF (1/6 Pages) ON Semiconductor – 8-Channel EMI Filter with Integrated ESD Protection

NUF8152, SZNUF8152
8-Channel EMI Filter with
Integrated ESD Protection
The NUF8152MU is a eight−channel (C−L−R−C) Pi−style EMI
filter array with integrated ESD protection. Its typical component
values of R = 28 W, C = 17 pF and L = 1.0 nH deliver a cutoff
frequency of 125 MHz and stop band attenuation greater than −25 dB
from 800 MHz to 3.0 GHz.
This performance makes the part ideal for parallel interfaces with
data rates up to 83 Mbps in applications where wireless interference
must be minimized. The specified attenuation range is very effective
in minimizing interference from 2G/3G, GPS, Bluetooth® and
WLAN signals.
The NUF8152MU is available in the low−profile 16−lead 1.2 mm x
3.5 mm x 0.5 mm UDFN16 surface mount package.
Features/Benefits
• ±13 kV ESD Protection on each channel (IEC61000−4−2 Level 4,
Contact Discharge)
• R/C Values of 28 W and 17 pF and L = 1.0 nH Deliver Exceptional
S21 Performance Characteristics of 125 MHz f_3dB and −25 dB Stop
Band Attenuation from 800 MHz to 3.0 GHz
• Integrated EMI/ESD System Solution in UDFN Package Offers
Exceptional Cost, System Reliability and Space Savings
• AEC−Q101 Qualified and PPAP Capable − SZNUF8152
• SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements
• These are Pb−Free Devices
Applications
• EMI Filtering for LCD and Camera Data Lines
• EMI Filtering and Protection for I/O Ports and Keypads
http://onsemi.com
16
1
UDFN16
CASE 517AF
MARKING
DIAGRAM
815 M
G
1
815 = Specific Device Code
M = Month Code
G = Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping^†
NUF8152MUT2G
UDFN16 3000 / Tape &
(Pb−Free)
Reel
SZNUF8152MUT2G UDFN16 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Filter + ESD_n
L = 1 nH R = 28 W
C_d = 17 pF C_d = 17 pF
Filter + ESD_n
See Table 1 for pin description
Figure 1. Electrical Schematic
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
1.0E + 6
10.0E + 6 100.0E + 6 1.0E + 9 10.0E + 9
FREQUENCY (Hz)
Figure 2. Typical Insertion Loss Characteristics
(S21 Measurement)
© Semiconductor Components Industries, LLC, 2011
1
November, 2011 − Rev. 0
Publication Order Number:
NUF8152/D