|
NUF6401 Datasheet, PDF (1/6 Pages) ON Semiconductor – 6-Channel EMI Filter with Integrated ESD Protection | |||
|
NUF6401, SNUF6401
6-Channel EMI Filter with
Integrated ESD Protection
The NUF6401MN is a sixâchannel (CâRâC) Piâstyle EMI filter
array with integrated ESD protection. Its typical component values of
R = 100 W and C = 17 pF deliver a cutoff frequency of 110 MHz and
stop band attenuation greater than â30 dB from 800 MHz to 3.0 GHz.
This performance makes the part ideal for parallel interfaces with
data rates up to 74 Mbps in applications where wireless interference
must be minimized. The specified attenuation range is very effective
in minimizing interference from 2G/3G, GPS, Bluetooth® and
WLAN signals.
The NUF6401MN is available in the lowâprofile 12âlead 1.35 mm
x 3.0 mm DFN12 surface mount package.
Features/Benefits
⢠±15 kV ESD Protection on each channel (IEC61000â4â2 Contact
Discharge)
⢠R/C Values of 100 W and 17 pF deliver Exceptional S21 Performance
Characteristics of 110 MHz f3dB and â30 dB Stop Band Attenuation
from 800 MHz to 3.0 GHz
⢠Integrated EMI/ESD System Solution in DFN Package Offers
Exceptional Cost, System Reliability and Space Savings
⢠S Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AECâQ101 Qualified and
PPAP Capable
⢠These are PbâFree Devices
Applications
⢠EMI Filtering for LCD and Camera Data Lines
⢠EMI Filtering and Protection for I/O Ports and Keypads
http://onsemi.com
MARKING
DIAGRAM
1
12
DFN12
64
CASE 506AD
01
MG
1
G
6401= Specific Device Code
M = Month
G = PbâFree Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package Shippingâ
NUF6401MNT1G
DFN12 3000 / Tape &
(PbâFree)
Reel
SNUF6401MNT1G DFN12 3000 / Tape &
(PbâFree)
Reel
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Filter + ESDn
R = 100 W
Cd = 17 pF Cd = 17 pF
Filter + ESDn
See Table 1 for pin description
Figure 1. Electrical Schematic
0
â5
â10
â15
â20
â25
â30
â35
â40
â45
1.0E+6
10E+6
100E+6
1.0E+9
FREQUENCY (Hz)
10E+9
Figure 2. Typical Insertion Loss Characteristic
© Semiconductor Components Industries, LLC, 2013
1
April, 2013 â Rev. 2
Publication Order Number:
NUF6401/D
|
▷ |