NUF2101M Datasheet, PDF (1/4 Pages) ON Semiconductor – USB Filter with ESD Protection

NUF2101M
USB Filter with ESD
Protection
This device is designed for applications requiring Line
Termination, EMI Filtering and ESD Protection. It is intended for
use in downstream USB 1.1 ports, Cellular phones, Wireless
equipment and computer applications. This device offers an integrated
solution in a small package (TSOP−6, Case 318G) reducing PCB
space and cost.
Features:
• Provides USB Line Termination, Filtering and ESD Protection
• Single IC Offers Cost Savings by Replacing 4 Resistors,
2 Capacitors, and 5 TVs diodes
• EMI Filtering Prevents Noise from Entering/Leaving the System
• IEC61000−4−2 (Level 4)
8 kV (Contact)
15 kV (Air)
• ESD Ratings: Machine Model = C
Human Body Model = 3B
• Pb−Free Package is Available
Benefits:
• TSOP−6 Package Minimizes PCB Space
• Integrated Circuit Increases System Reliability versus Discrete
Component Implementation
• TVs Devices Provide ESD Protection That is Better than a Discrete
Implementation because the Small IC minimizes Parasitic
Inductances
Typical Applications:
• USB Hubs
• Computer Motherboards
MAXIMUM RATINGS (T_A = 25°C)
Rating
Symbol
Value
Unit
Steady State Power
P_D
225
mW
Maximum Junction Temperature T_J(max)
125
°C
Operating Temperature Range
T_J
−55 to +125
°C
Storage Temperature Range
T_stg
−55 to +125
°C
Lead Solder Temperature
T_L
260
°C
(10 second duration)
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
http://onsemi.com
D+_OUT
1
2
D−_OUT
3
SCHEMATIC
R_S
15 k
15 k
D+_IN
6
V_BUS
5
D−_IN
4
1
TSOP−6
CASE 318G
STYLE 10
MARKING DIAGRAM
6V^MG
G
1
6V = Specific Device Code
M _{= Date Code}
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
Device
Package
Shipping^†
NUF2101MT1 TSOP−6 3000/Tape & Reel
NUF2101MT1G TSOP−6 3000/Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2005
1
August, 2005 − Rev. 1
Publication Order Number:
NUF2101M/D