|
NUD3105D Datasheet, PDF (1/8 Pages) ON Semiconductor – Integrated Relay, Inductive Load Driver | |||
|
NUD3105D
Integrated Relay,
Inductive Load Driver
This device is used to switch inductive loads such as relays,
solenoids incandescent lamps , and small DC motors without the need
of a freeâwheeling diode. The device integrates all necessary items
such as the MOSFET switch, ESD protection, and Zener clamps. It
accepts logic level inputs thus allowing it to be driven by a large
variety of devices including logic gates, inverters, and
microcontrollers.
Features
⢠Provides a Robust Driver Interface Between D.C. Relay Coil and
Sensitive Logic Circuits
⢠Optimized to Switch Relays from 3.0 V to 5.0 V Rail
⢠Capable of Driving Relay Coils Rated up to 2.5 W at 5.0 V
⢠Internal Zener Eliminates the Need of FreeâWheeling Diode
⢠Internal Zener Clamp Routes Induced Current to Ground for Quieter
Systems Operation
⢠Low VDS(ON) Reduces System Current Drain
Typical Applications
⢠Telecom: Line Cards, Modems, Answering Machines, FAX
⢠Computers and Office: Photocopiers, Printers, Desktop Computers
⢠Consumer: TVs and VCRs, Stereo Receivers, CD Players, Cassette
Recorders
⢠Industrial:Small Appliances, Security Systems, Automated Test
Equipment, Garage Door Openers
⢠Automotive: 5.0 V Driven Relays, Motor Controls, Power Latches,
Lamp Drivers
http://onsemi.com
Relay, Inductive Load Driver
Silicon SMALLBLOCK]
0.5 Ampere, 8.0 V Clamp
4
5
6
MARKING DIAGRAMS
3
2
1
JW4 D
SCâ74
CASE 318F
STYLE 7
JW4
D
= Specific Device Code
= Date Code
ORDERING INFORMATION
Device
Package
Shippingâ
NUD3105DMT1 SCâ74 3000/Tape & Reel
â For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
INTERNAL CIRCUIT DIAGRAMS
Drain (6)
Drain (3)
Gate (2)
1.0 k
300 k
1.0 k
300 k
Gate (5)
Source (1)
Source (4)
CASE 318F
© Semiconductor Components Industries, LLC, 2004
1
September, 2004 â Rev. 2
Publication Order Number:
NUD3105D/D
|
▷ |