NS5A4684SMNTBG Datasheet, PDF (1/8 Pages) ON Semiconductor – Ultra-Low Resistance Dual SPDT Analog Switch

NS5A4684S
Ultra-Low Resistance
Dual SPDT Analog Switch
The NS5A4684S is an advanced CMOS analog switch fabricated in
Sub−micron silicon gate CMOS technology. The device is a dual
Independent Single Pole Double Throw (SPDT) switch featuring
Ultra−Low R_ON of 0.6 W.
The part also features guaranteed Break Before Make (BBM)
switching, assuring the switches never short the driver.
Features
• Ultra−Low R_ON of 0.6 W Max
• Interfaces with 2.8 V Chipset
• Single Supply Operation from 1.65−5.5 V
• Full 0−V_CC Signal Handling Capability
• High Isolation; −68 dB at 100 kHz
• Low Standby Current, t50 nA
• Low Distortion; < 0.08% THD
• Low Crosstalk; < −70 dB at 100 kHz
• High Continuous Current Capability
$300 mA Through Each Switch
• Large Current Clamping Diodes at Analog Inputs
$300 mA Continuous Current Capability
• Package:
♦ 1.4 x 1.8 x 0.75 mm WQFN10 Package
• This is a Pb−Free Device
Applications
• Cell Phone Audio Block
• Speaker and Earphone Switching
• Ring−Tone Chip / Amplifier Switching
• Modems
http://onsemi.com
MARKING
DIAGRAM
WQFN10
AGMG
CASE 488AQ
G
1
AG = Specific Device Code
M
= Date Code/Assembly Location
G
= Pb−Free Device
(Note: Microdot may be in either location)
NC2
7
GND
6
IN2 8
5 NC1
COM2 9
NO2 10
4 IN1
3 COM1
1
2
V_CC
NO1
FUNCTION TABLE
IN 1, 2
NO 1, 2
NC 1, 2
0
OFF
ON
1
ON
OFF
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
© Semiconductor Components Industries, LLC, 2013
1
March, 2013 − Rev. 1
Publication Order Number:
NS5A4684S/D