NRVBA140T3G Datasheet, PDF (1/5 Pages) ON Semiconductor – Surface Mount Schottky Power Rectifier

NRVBA140T3G
Surface Mount
Schottky Power Rectifier
SMA Power Surface Mount Package
This device employs the Schottky Barrier principle in a large area
metal−to−silicon power diode. State of the art geometry features
epitaxial construction with oxide passivation and metal overlay
contact. Ideally suited for low voltage, high frequency rectification, or
as free wheeling and polarity diodes in surface mount applications
where compact size and weight are critical to the system.
Features
• Small Compact Surface Mountable Package with J−Bent Leads
• Rectangular Package for Automated Handling
• Highly Stable Oxide Passivated Junction
• Very Low Forward Voltage Drop
• Guardring for Stress Protection
• This is a Pb−Free Device
Mechanical Characteristics
• Case: Epoxy, Molded
• Weight: 70 mg (approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead and Mounting Surface Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
• Shipped in 12 mm tape, 5000 units per 13 inch reel
• Polarity: Cathode Lead Indicated by Either Notch in Plastic Body
or Polarity Band
http://onsemi.com
SCHOTTKY BARRIER
RECTIFIER
1.0 AMPERES
40 VOLTS
MARKING
DIAGRAM
SMA
CASE 403D
PLASTIC
B14
AYWW G
A
= Assembly Location
Y
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
Device
Package
Shipping^†
NRVBA140T3G
SMA 5000 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2011
1
May, 2011 − Rev. 0
Publication Order Number:
NRVBA140/D