NOIP1SN1300A Datasheet, PDF (1/2 Pages) ON Semiconductor – PYTHON 0.3/0.5/1.3 Megapixel Global Shutter CMOS Image Sensors

NOIP1SN1300A,
NOIP1SN0500A,
NOIP1SN0300A
PYTHON 0.3/0.5/1.3 Megapixel
Global Shutter CMOS
Image Sensors
www.onsemi.com
Features
• SXGA: 1280 x 1024 Active Pixels, 1/2” Optical Format
SVGA: 800 x 600 Active Pixels, 1/3.6” Optical Format
VGA: 640 x 480 Active Pixels, 1/4” Optical Format
• 4.8 mm x 4.8 mm Low Noise Global Shutter Pixels with
In-pixel CDS
• Monochrome (SN) or Color (SE)
• Zero ROT Mode Enabling Faster Frame Rate
• Frame Rate at Full Resolution (LVDS)
♦ 210/175 frames per second @ SXGA (Zero ROT/Normal ROT)
♦ 560/420 frames per second @ SVGA (Zero ROT/Normal ROT)
♦ 860/620 frames per second @ VGA (Zero ROT/Normal ROT)
• 43 Frames per Second (fps) at Full Resolution (CMOS)
• On-chip 10-bit Analog-to-Digital Converter (ADC)
• 8-bit or 10-bit Output Mode
• Four Low Voltage Differential Signaling (LVDS) High Speed
Serial Outputs or Parallel CMOS Output
Figure 1. PYTHON 1300 Photograph
• Random Programmable Region of Interest (ROI) Readout
• Pipelined and Triggered Global Shutter, Rolling Shutter
• On-chip Fixed Pattern Noise (FPN) Correction
• Serial Peripheral Interface (SPI)
The sensor has on-chip programmable gain amplifiers and
• Automatic Exposure Control (AEC)
• Phase Locked Loop (PLL)
• High Dynamic Range (HDR)
• Dual Power Supply (3.3 V and 1.8 V)
• −40°C to +85°C Operational Temperature Range
10-bit A/D converters. The integration time and gain
parameters can be reconfigured without any visible image
artifact. Optionally the on-chip automatic exposure control
loop (AEC) controls these parameters dynamically. The
image’s black level is either calibrated automatically or can
be adjusted by adding a user programmable offset.
• 48-pin LCC and Bare Die
• 590 mW Power Dissipation (LVDS)
• 375 mW Power Dissipation (CMOS)
• These Devices are Pb−Free and are RoHS Compliant
Applications
• Machine Vision
• Motion Monitoring
A high level of programmability using a four wire serial
peripheral interface enables the user to read out specific
regions of interest. Up to 8 regions can be programmed,
achieving even higher frame rates.
The image data interface of the P1-SN/SE part consists of
four LVDS lanes, facilitating frame rates up to 210 frames
per second in Zero ROT mode. Each channel runs at
720 Mbps. A separate synchronization channel containing
• Security
• Barcode Scanning (2D)
Description
The Python’s high sensitivity 4.8 mm x 4.8 mm pixels
support low noise “pipelined” and “triggered” global shutter
readout modes. In global shutter mode, the sensor supports
correlated double sampling (CDS) readout, reducing noise
and increasing dynamic range.
payload information is provided to facilitate the image
reconstruction at the receiving end. The P2-SN/SE part
provides a parallel CMOS output interface at reduced frame
rate.
The PYTHON low resolution family is packaged in a
48-pin LCC package and is available in a monochrome and
color version. For NIR variants, please contact your local
distributor or email us at [e-mail].
© Semiconductor Components Industries, LLC, 2014
1
October, 2014 − Rev. P2
Publication Order Number:
PB_NOIP1SN1300A/D