NLSX4402 Datasheet, PDF (1/13 Pages) ON Semiconductor – 2-Bit 20 Mb/s Dual-Supply Level Translator

NLSX4402
2-Bit 20 Mb/s Dual-Supply
Level Translator
The NLSX4402 is a 2−bit configurable dual−supply bidirectional
auto sensing translator that does not require a directional control pin.
The V_CC I/O and V_L I/O ports are designed to track two different
power supply rails, V_CC and V_L respectively. Both the V_CC and V_L
supply rails are configurable from 1.5 V to 5.5 V. This allows voltage
logic signals on the V_L side to be translated into lower, higher or
equal value voltage logic signals on the V_CC side, and vice−versa.
The NLSX4402 translator has internal pull−up resistors on the I/O
lines. The pull−up resistors are used to pull up the I/O lines to either
V_L or V_CC. The NLSX4402 is an excellent match for open−drain
applications such as the I²C communication bus.
Features
• V_L can be Less than, Greater than or Equal to V_CC
• Wide V_CC Operating Range: 1.5 V to 5.5 V
Wide V_L Operating Range: 1.5 V to 5.5 V
• Enable Input and I/O Pins are Overvoltage Tolerant (OVT) to 5.5 V
• Non−preferential Powerup Sequencing
• Power−Off Protection
• Small Space Saving Package: 1.45 mm x 1.0 mm UDFN8 Package
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Typical Applications
• I²C, SMBus
• Low Voltage ASIC Level Translation
• Mobile Phones, PDAs, Cameras
Important Information
• ESD Protection for All Pins
− Human Body Model (HBM) > 5000 V
www.onsemi.com
UDFN8
1.45 x 1.0
CASE 517BZ
MARKING
DIAGRAMS
JM
1
J = Specific Device Code
M = Date Code
LOGIC DIAGRAM
V_L V_CC GND
EN
I/O V_L1
I/O V_CC1
I/O V_L2
I/O V_CC2
ORDERING INFORMATION
Device
Package Shipping^†
NLSX4402FMUTCG UDFN8 3000 / Tape &
(Pb−Free)
Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2015
1
June, 2015 − Rev. 1
Publication Order Number:
NLSX4402/D