NE5532 Datasheet, PDF (1/10 Pages) NXP Semiconductors – Internally-compensated dual low noise operational amplifier

NE5532, SA5532, SE5532,
NE5532A, SE5532A
Internally Compensated
Dual Low Noise
Operational Amplifier
The 5532 is a dual high-performance low noise operational
amplifier. Compared to most of the standard operational amplifiers,
such as the 1458, it shows better noise performance, improved output
drive capability and considerably higher small-signal and power
bandwidths.
This makes the device especially suitable for application in
high-quality and professional audio equipment, instrumentation and
control circuits, and telephone channel amplifiers. The op amp is
internally compensated for gains equal to one. If very low noise is of
prime importance, it is recommended that the 5532A version be used
because it has guaranteed noise voltage specifications.
Features
• Small-Signal Bandwidth: 10 MHz
• Output Drive Capability: 600 W, 10 V_RMS
• Input Noise Voltage: 5.0 nVń ^ǸHz (Typical)
• DC Voltage Gain: 50000
• AC Voltage Gain: 2200 at 10 kHz
• Power Bandwidth: 140 kHz
• Slew Rate: 9.0 V/ms
• Large Supply Voltage Range: "3.0 to "20 V
• Compensated for Unity Gain
• Pb−Free Packages are Available
© Semiconductor Components Industries, LLC, 2006
1
March, 2006 − Rev. 1
http://onsemi.com
8
1
SOIC−8
D SUFFIX
CASE 751
8
1
PDIP−8
N SUFFIX
CASE 626
16
1
SOIC−16 WB
D SUFFIX
CASE 751G
PIN CONNECTIONS
N, D8 Packages
OUT_A 1
−IN_A 2
A
+IN_A 3
V- 4
8 V+
B
7 OUT_B
6 −INB
5 +IN_B
Top View
D Package*
−IN_A 1
+IN_A 2
NC 3
V− ⁴
NC ⁵
NC 6
+IN_B ⁷
−IN_B ⁸
16 NC
15 NC
14 NC
13 OUT_A
12 V+
11 OUT_B
10 NC
9 NC
Top View
*SOL and non-standard pinout.
DEVICE MARKING INFORMATION
See general marking information in the device marking
section on page 6 of this data sheet.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 7 of this data sheet.
Publication Order Number:
NE5532/D