NCV8603SN33T1G Datasheet, PDF (1/10 Pages) ON Semiconductor – 300 mA High Performance CMOS LDO Regulator with Enable and Enhanced ESD

NCV8603
300 mA High Performance
CMOS LDO Regulator with
Enable and Enhanced ESD
Protection
The NCV8603 provides 300 mA of output current at fixed voltage
options. It is designed for portable battery powered applications and
offers high performance features such as low power operation, fast
enable response time, and low dropout.
The device is designed to be used with low cost ceramic capacitors
and is packaged in the TSOP−5.
Features
 Fast Enable Turn−on Time of 15 ms
 Wide Supply Voltage Range Operating Range
 Excellent Line and Load Regulation
 Typical Noise Voltage of 50 mV_rms without a Bypass Capacitor
 Enhanced ESD Protection (HBM 3.5 kV, MM 200 V)
 NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
 These are Pb−Free Devices
Typical Applications
 SMPS Post−Regulation
 Hand−held Instrumentation & Audio Players
 Noise Sensitive Circuits – VCO, RF Stages, etc.
 Camcorders and Cameras
 Portable Computing
V_IN
V_OUT
GND
Driver w/
Current Limit
Thermal
Shutdown
+
-
+
−^{1.25 V}
http://onsemi.com
TSOP−5
SN SUFFIX
CASE 483
PIN CONNECTIONS
V_in 1
GND 2
5 V_out
ENABLE 3
4 NC
(Top View)
MARKING DIAGRAM
5
ADWAYWG
G
1
ADW
A
Y
W
G
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the
package dimensions section on page 9 of this data sheet.
ENABLE
Figure 1. Simplified Block Diagram
 Semiconductor Components Industries, LLC, 2013
1
July, 2013 − Rev. 2
Publication Order Number:
NCV8603/D