NCV8535_13 Datasheet, PDF (1/22 Pages) ON Semiconductor – Ultra High Accuracy, Low Iq, 500 mA Low Dropout Regulator with Enable

NCV8535
Ultra High Accuracy, Low Iq,
500 mA Low Dropout
Regulator with Enable
The NCV8535 is a high performance, low dropout regulator. With
accuracy of 0.9% over line and load and ultra−low quiescent current
and noise it encompasses all of the necessary features required by
today’s consumer electronics. This unique device is guaranteed to be
stable without a minimum load current requirement and stable with
any type of capacitor as small as 1.0 mF. The NCV8535 also comes
equipped with sense and noise reduction pins to increase the overall
utility of the device. The NCV8535 offers reverse bias protection.
Features
 High Accuracy Over Line and Load (0.9% at 25C)
 Ultra−Low Dropout Voltage at Full Load (260 mV typ.)
 No Minimum Output Current Required for Stability
 Low Noise (31 mVrms w/10 nF C_nr and 51 mVrms w/out C_nr)
 Low Shutdown Current (0.07 mA)
 Reverse Bias Protected
 2.9 V to 12 V Supply Range
 Thermal Shutdown Protection
 Current Limitation
 Requires Only 1.0 mF Output Capacitance for Stability
 Stable with Any Type of Capacitor (including MLCC)
 Available in 1.5 V, 1.8 V, 1.9 V, 2.5 V, 2.8 V, 2.85 V, 3.0 V, 3.3 V,
3.5 V, 5.0 V and Adjustable Output Voltages
 NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
 These are Pb−Free Devices
Applications
 PCMCIA Card
 Cellular Phones
 Camcoders and Cameras
 Networking Systems, DSL/Cable Modems
 Cable Set−Top Box
 MP3/CD Players
 DSP Supply
 Displays and Monitors
http://onsemi.com
DFN10
MN SUFFIX
CASE 485C
PIN CONFIGURATION
Fixed Version
Pin 1, 2. V_out
3. Sense
4. GND
5, 6. NC
7. NR
8. SD
9, 10. V_in
Adj Version
Pin 1, 2. V_out
3. Adj
4. GND
5, 6. NC
7. NR
8. SD
9, 10. V_in
MARKING DIAGRAM
1 _V8535
xxx
ALYWG
G
V8535= Specific Device Code
xxx = ADJ, 150, 180, 190, 250, 280,
285, 300, 330, 350, 500
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 21 of this data sheet.
 Semiconductor Components Industries, LLC, 2013
1
May, 2013 − Rev. 4
Publication Order Number:
NCV8535/D