NCV8512 Datasheet, PDF (1/10 Pages) ON Semiconductor – 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY, Adjustable RESET, and Monitor FLAG

NCV8512
5.0 V Micropower 150 mA
LDO Linear Regulator with
DELAY, Adjustable RESET,
and Monitor FLAG
The NCV8512 is a 5.0 V precision micropower voltage regulator.
The output current capability is 150 mA.
The output voltage is accurate within ±2.0% with a maximum
dropout voltage of 0.6 V at 150 mA. Low quiescent current is a feature
drawing only 130 mA with a 100 mA load. This part is ideal for any and
all battery operated microprocessor equipment.
Microprocessor control logic includes an active RESET (with
DELAY), and a FLAG monitor which can be used to provide an early
warning signal to the microprocessor of a potential impending RESET
signal. The use of the FLAG monitor allows the microprocessor to
finish any signal processing before the RESET shuts the
microprocessor down.
The active RESET circuit operates correctly at an output voltage as
low as 1.0 V. The RESET function is activated during the power up
sequence or during normal operation if the output voltage drops
outside the regulation limits.
The reset threshold voltage can be decreased by the connection of an
external resistor divider to R_ADJ lead.
The regulator is protected against reverse battery, short circuit, and
thermal overload conditions. The device can withstand load dump
transients making it suitable for use in automotive environments. The
device has also been optimized for EMC conditions.
Features
• 5.0 V ± 2.0% Output
• Low 130 mA Quiescent Current
• Active RESET
• Adjustable Reset
• 150 mA Output Current Capability
• Fault Protection
− +60 V Peak Transient Voltage
− −15 V Reverse Voltage
− Short Circuit
− Thermal Overload
• Early Warning through FLAG/MON Leads
• Thermally Enhanced in SOW−16 Exposed Pad
• NCV Prefix for Automotive and Other Applications Requiring Site
and Control Changes
http://onsemi.com
16
1
SOIC 16 LEAD
WIDE BODY
EXPOSED PAD
PW SUFFIX
CASE 751AG
MARKING
DIAGRAM
16
NCV8512
AWLYYWWG
1
A = Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G = Pb−Free Device
PIN CONNECTIONS*
1
NC
V_OUT
NC
NC
NC
NC
V_IN
MON
16
FLAG
RESET
NC
GND
NC
NC
DELAY
R_ADJ
*Pin connections for reference only.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 9 of this data sheet.
© Semiconductor Components Industries, LLC, 2006
1
December, 2006 − Rev. 0
Publication Order Number:
NCV8512/D