NCV8460A_16 Datasheet, PDF (1/16 Pages) ON Semiconductor – Self Protected High Side Driver

NCV8460A
Self Protected High Side
Driver with Temperature
Shutdown and Current Limit
The NCV8460A is a fully protected High−Side driver that can be
used to switch a wide variety of loads, such as bulbs, solenoids and
other acuators. The device is internally protected from an overload
condition by an active current limit and thermal shutdown.
A diagnostic output reports ON and OFF state open load conditions
as well as thermal shutdown.
Features
• Short Circuit Protection
• Thermal Shutdown with Automatic Restart
• CMOS (3.3 V / 5 V) compatible control input
• Open Load Detection in On and Off State
• Diagnostic Output
• Undervoltage and Overvoltage Shutdown
• Loss of Ground Protection
• ESD protection
• Slew Rate Control for Low EMI Switching
• Very Low Standby Current
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC Qualified and
PPAP Capable
• These Devices are Pb−Free and are RoHS Compliant
Typical Applications
• Switch a Variety of Resistive, Inductive and Capacitive Loads
• Can Replace Electromechanical Relays and Discrete Circuits
• Automotive / Industrial
www.onsemi.com
PRODUCT SUMMARY
Parameter
Symbol Value Units
Operating Voltage Range
R_DSon(max) T_J = 25°C
Output Current Limit (min)
V_S
R_ON
I_lim
6 to 36 V
60 mW
6
A
MARKING
DIAGRAM
8
1
SO−8
D SUFFIX
CASE 751
8
V8460A
ALYW
G
1
V8460A = Specific Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
PIN CONNECTIONS
GND 1
IN 2
STAT 3
NC 4
8 VD
7 OUT
6 OUT
5 VD
(Top View)
ORDERING INFORMATION
Device
Package
Shipping^†
NCV8460ADR2G SOIC−8 2500 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2016
1
March, 2016 − Rev. 6
Publication Order Number:
NCV8460/D