NCV7754 Datasheet, PDF (1/26 Pages) ON Semiconductor – Octal Low-Side Relay Driver

NCV7754
Octal Low-Side
Relay Driver
The NCV7754 is an automotive eight channel low−side driver
providing drive capability up to 500 mA per channel. Output control is
via a SPI port and offers convenient reporting of faults for open load
(or short to ground), over load, and over temperature conditions.
Additionally, parallel control of the outputs is addressable (in pairs)
via the INx pins.
A dedicated limp−home mode pin (LHI) enables OUT1−OUT4
while disabling OUT5−OUT8.
Each output driver is protected for over load current and includes an
output clamp for inductive loads.
The NCV7754 is available in a SSOP−24 fused lead package.
Features
• 8 Channels
• 500 mA Low−Side Drivers
♦ R_DS(on) 0.8 W (Typ), 1.6 W (Max)
• 16−bit SPI Control
♦ Frame Error Detection (8−bit)
♦ Daisy Chain Capable
• Parallel Input Pins for PWM operation
• Power Up Without Open Circuit Detection Active (for LED
applications)
• Low Quiescent Current in Sleep and Standby Modes
• Limp Home Functionality
• 3.3 V and 5 V compatible Digital Input Supply Range
• Fault Reporting
♦ Open Load Detection (selectable)
♦ Over Load
♦ Over Temperature
• Power−on Reset (VDD, VDDA)
• SSOP−24 Package (internally fused leads)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Applications
• Automotive Body Control Unit
• Automotive Engine Control Unit
• Relay Driver
• LED Driver
• Stepper Motor Driver
http://onsemi.com
MARKING
DIAGRAM
SSOP−24
CASE 565AL
NCV7754
AWLYWWG
A
= Assembly Location
WL = Wafer Lot
Y
= Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 25 of this data sheet.
© Semiconductor Components Industries, LLC, 2015
1
February, 2015 − Rev. 1
Publication Order Number:
NCV7754/D