NCV7718B Datasheet, PDF (1/27 Pages) ON Semiconductor – Hex Half-Bridge Driver

NCV7718B
Hex Half-Bridge Driver
The NCV7718B is a Hex Half−Bridge Driver with protection
features designed specifically for automotive and industrial motion
control applications. The NCV7718B has independent controls and
diagnostics. The device can be operated in forward, reverse, brake,
and high impedance states. The drivers are controlled via a 16 bit SPI
interface and are daisy chain compatible.
Features
• Low Quiescent Current Sleep Mode
• High−Side and Low−Side Drivers Connected in a Half−Bridge
Configuration
• Integrated Freewheeling Protection (LS and HS)
• 0.55 A Peak Current
• R_DS(on) = 1 W (typ)
• 5 MHz SPI Control
• Compliance with 5 V and 3. 3 V Systems
• Undervoltage and Overvoltage Lockout
• Discriminated Fault Reporting
• Overcurrent Protection
• Overtemperature Protection
• Under Load Detection (LS)
• Daisy Chain Compatible with Multiple of 8 bit Devices
• 16−Bit Frame Detection
• Exposed Pad Package
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Typical Applications
• Automotive
• Industrial
• DC Motor Management for HVAC Application
http://onsemi.com
MARKING
DIAGRAM
SSOP24 NB EP
CASE 940AK
NCV7718B
AWLYYWWG
NCV7718B = Specific Device Code
A
= Assembly Location
WL = Wafer Lot
YY = Year
WW = Work Week
G
= Pb−Free Package
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 25 of this data sheet.
© Semiconductor Components Industries, LLC, 2014
1
August, 2014 − Rev. 0
Publication Order Number:
NCV7718B/D